We offer the widest product range of low-flow (mass) flow meters and controllers on the market. Numerous styles of both standard and bespoke instruments can be offered for applications in laboratory, machinery, industry and hazardous areas.
Customer satisfaction, innovation and quality of product and service have been the cornerstones of Bronkhorst's success. Based on our experience, innovation and sense of responsibility, a relationship with Bronkhorst assures Performance for Life.
Bronkhorst instruments are used for numerous applications in many different markets. In this section you will find an overview of the main markets for our equipment, illustrated with some typical examples of applications.
Are you looking for technical documentation, are you interested to learn more about the measuring principles of Bronkhorst products, or you do want to get in contact with a Bronkhorst Service Engineer? This section will guide you to the relevant service & support topics.
Bronkhorst High-Tech BV the leaders in Mass Flow Meter / Mass Flow Controller technology for gases and liquids, Pressure Controllers and Evaporation Systems.
Each industrial process starts on laboratory scale to define the important parameters efficiently. These parameters might be pressure, temperature, flow but also cost efficiency and standing times. The process with the highest yield is not automatically the most efficient one. For example in catalysis or exhaust/raw gas purification it is very important to find the economically best materials and parameters. From the laboratory beaker to bulk is the process which starts at a microscale and ends with a fully operating industrial process. In between often a pilot stage is included.
In the example above, the sorptive separation of CO2 and CH4 is investigated. In this case, CO2 is adsorbed by the material while the gas is flowing through the fixed bed. A high-purity methane stream is recovered at the top end of the adsorber column.
Three temperature sensors are positioned at different heights within the adsorber column. Due to the exothermic adsorption process, a temperature change within the adsorber bed can be detected, indicating the so-called Mass Transfer Zone (MTZ) going through the fixed bed. When this zone reaches the adsorber head, a corresponding breakthrough can be observed by using downstream gas analysis. Thereby the measured CO2 concentration in the product stream approaches the CO2 concentration of the feed stream. In larger industrial systems the adsorber should be regenerated at this time. This kind of experimental data provides information about adsorption capacities of the substances being investigated.
The IQ+FLOW series consists of ultra compact mass flow meters, controllers and also pressure controllers, which are designed for analytical instruments with limited space. The integrated chip technology enables fast measurement and control down to smallest ammounts. 3-Channel devices designed for customer’s application are also available.
Have a look at our video explaining the principle of EL-FLOW Prestige digital mass flow controllers
Stay up to date with the latest developments in high tech with our newsletter.