Bronkhorst
EX-PROOF CORIOLIS MASS FLOW METERS - mini CORI-FLOW™ EX D series

MINI CORI-FLOW™ EX D CORIOLIS MASS FLOW METERS

Fluid independent Mass Flow Measurement solution for Zone 1 applications

The compact mass flow meters of mini CORI-FLOW™ series M12-M14 can be built in an explosion proof housing for use in IECEx and ATEX Zone 1 hazardous areas, ATEX approval II 2 G Ex d e IIB T6 Gb. All electrical instrument connections are available on screw terminals in an electrical housing connected to the Ex d box. The mini CORI-FLOW™ Ex d series are designed for small flow rates, from 100 mg/h up to 30 kg/h, both for liquids and gases. The instruments can be used in systems with pipeline pressures up to 137 bar (1987 psi). The Coriolis flow meter can be equipped with a heater to prevent condensation or solidification inside the instrument. Optionally an additional (external) control unit can be provided to monitor and control the heating temperature.

mini CORI-FLOW™ Ex d models XM12 thru XM14 can be offered for flow rates from

  • lowest range 0…5 g/h
  • up to highest range 0…30 kg/h

 

Ask advice

E-book: How to handle low liquid flows

Focusing on low liquid flows < 100 g/h

Download the e-book 'How to handle low liquid flows' to find out more about 'low flows'. Including in-depth information, technical advice and insider tips from our experts.

Download e-book

Quick link to Mass Flow Meter / Controller model pages

Mass Flow Meter/Controller model pages

Full Scale capacities versus pressure rating

PN 107 bar PN 138 bar
  XM12  |  0 ... 200 g/h
  XM13  |  0 ... 2000 g/h
XM14  |  0 ... 30 kg/h  

Features

  • Direct mass flow measurement
  • Fast response time
  • High accuracy (0,2% Rd + ZS for liquids, 0,5% Rd + ZS for gases)
  • Highly stable
  • Compact Coriolis Controller
  • All wetted parts stainless steel
  • Explosion proof housing for use in IECEx and ATEX Zone 1 hazardous areas
  • IP65 housing
  • Analog plus digital communication
  • Integrated PID controller for control valve or pump
  • Integrated totaliser for batch control

afbeelding

Mass Flow Meter for applications in hazardous area, Zone 1

Instruments of the mini CORI-FLOW™ Ex d series contain a uniquely shaped, single loop sensor tube, forming part of an oscillating system. When a fluid flows through the tube, Coriolis forces cause a variable phase shift, which is detected by sensors and fed into the integrally mounted pc-board. The resulting output signal is strictly proportional to the real mass flow rate. Coriolis mass flow measurement is fast, accurate and inherently bi-directional. The mini CORI-FLOW™ Ex d features density and temperature of the fluid as secondary outputs.
Mass Flow Control

mini CORI-FLOW™ Ex d mass flow meters offer integrated PID control for direct control of valves or pumps, thus constituting compact Coriolis mass flow control loops. Valves or pumps to be used in Zone 1 can also be provided with the meter, but have to be installed outside the Ex d box, to be electrically connected to the screw terminal of the unit.

Read more about Coriolis measurement principle

Downloads

Brochures
mini CORI-FLOW Ex d brochure

Manuals (incl. dimensions)
mini CORI-FLOW Ex d - Manual

Certificates
ATEX: DEKRA 12ATEX0114X
IECEx: IECEx DEK 12.0040
TIIS Zone 1 / JP Ex: DEK 19.0041
mini CORI-FLOW Ex D application

Applications

The instruments are suited for a variety of applications in:

  • Semiconductor processing
  • Food and beverage industries
  • (Petro-) chemical installations

Application story


BRONKHORST (UK) Ltd

1 Kings Court
Willie Snaith Road
Newmarket Suffolk CB8 7TG
Tel. +44 1223 833222
[email protected]

         Social Responsibility
Copyright © 2024 Bronkhorst. All rights reserved.     Sitemap     Disclaimer     Privacy note