Low Flow Coriolis Mass Flow Meter / Controller

  • High accuracy, excellent repeatability
  • Fast response
  • Independent of fluid properties
  • Compact, rugged (IP65) design
  • Optional ATEX approval Cat.3, Zone 2
Get a quote Downloads Support

Low Flow Coriolis Mass Flow Meters / Controllers for Liquid and Gases

CORI-FLOW™ Mass Flow Meters and Controllers are precise and compact instruments, based on the Coriolis measuring principle, designed to cover the needs of the low flow market. Bronkhorst® model M55 Mass Flow Meter (MFM) is suited for highly accurate measurement of gas or liquid flow ranges between 0,5…50 kg/h and 6…600 kg/h (which corresponds with 6,66…666,6 ln/min up to 80…8000 ln/min when used on nitrogen) at operating pressures up to 100 bar. The instruments are equipped with a robust IP65 weatherproof housing and are optionally available with ATEX approval for use in Zone 2 hazardous areas.

The instrument contains a microprocessor based pc-board with signal and fieldbus conversion and a PID controller for optional mass flow control by means of a separately mounted control valve or pump.

Technical specifications

Measurement / control system
Flow range (intermediate ranges available)min. 0,5…50 kg/h
max. 6…600 kg/h
Mass flow accuracyLiquid: ±0,2% RD;
Gas: ±0,5% RD
Repeatability± 0,1 % RD
Turndown ratioup to 1:100
Zero stability (ZS)< ± 1 kg/h
(Guaranteed at constant temperature and for unchanging process and environmental conditions.)
Operating temperaturestandard: 0…70°C;
max. 50°C for ATEX Cat.3, Zone 2;
max. 120°C for special version with remote electronics (130°C ≤ 1 hour allowed for CIP)
MountingAny position, attitude sensitivity negligible;
External shocks or vibrations should be avoided.
Leak integrity, outboardOutboard < 2 x 10-9 mbar l/s He
Warm-up time> 30 min for optimum accuracy
Mechanical parts
Material (wetted parts)stainless steel 316L or comparable
Pressure rating (PN)100 bar abs
Process connectionscompression type or face seal couplings (welded)
Ingress protectionIP65 (weatherproof)
Electrical properties
Power supply+15…24 Vdc +/- 10%
Max. ripple recommended: 50 mV tt
Max. power consumptionMeter: approx. 80 mA at 15 Vdc
Analog output0…5 (10) Vdc, min. load impedance > 2 kΩ;
0 (4)…20 mA (sourcing), max. load impedance < 375 Ω
Analog setpoint(for MFM + pump or control valve)
Digital communicationstandard: RS232;
options: options: PROFIBUS DP, DeviceNet™, Modbus RTU or FLOW-BUS
Electrical connection
Analog/RS2328-pin DIN (male);
PROFIBUS DPbus: 5-pin M12 (female);
power: 8-pin DIN (male);
CANopen® / DeviceNet™5-pin M12 (male);
FLOW-BUS/Modbus-RTU/ASCII5-pin M12 (male);
Control valve options
M55+C0I: Gas flow control valveKv-max= 6,6 x 10-2
M55+C2I: Liquid flow control valveKv-max= 2,3 x 10-3
M55+C5I: Gas/Liquid flow control valveKv-max= 6,6 x 10-2
M55+F-004AI: Gas/Liquid flow controlKv-max= 3,0 x 10-1
M55+F-004BI: Gas/Liquid flow controlKv-max= 1,0
External actuator options to be connected to the controller
Ex-proof specifications
Approvals / certificates

Technical specifications subject to change without notice.

For dimensional drawings and hook-up diagrams please visit the product page on our website


CORI-FLOW M54-M55 brochure
CORI-FILL brochure


KCs certificate

Hook-up diagrams
Analog I-O RS232

Dimensional drawing
M52 - M53 - M54 - M55 Mass Flow Meters
M5x MFM with C0I - C2I control valve
M5x MFM with C5I control valve
M5x MFM with F-004AI control valve


1 Kings Court
Willie Snaith Road
Newmarket Suffolk CB8 7TG
Tel. +44 1223 833222
[email protected]

Copyright © 2020 Bronkhorst. All rights reserved.     Sitemap     Disclaimer     Privacy note