We offer the widest product range of low-flow (mass) flow meters and controllers on the market. Numerous styles of both standard and bespoke instruments can be offered for applications in laboratory, machinery, industry and hazardous areas.
Customer satisfaction, innovation and quality of product and service have been the cornerstones of Bronkhorst's success. Based on our experience, innovation and sense of responsibility, a relationship with Bronkhorst assures Performance for Life.
Bronkhorst instruments are used for numerous applications in many different markets. In this section you will find an overview of the main markets for our equipment, illustrated with some typical examples of applications.
Are you looking for technical documentation, are you interested to learn more about the measuring principles of Bronkhorst products, or you do want to get in contact with a Bronkhorst Service Engineer? This section will guide you to the relevant service & support topics.
Bronkhorst High-Tech BV the leaders in Mass Flow Meter / Mass Flow Controller technology for gases and liquids, Pressure Controllers and Evaporation Systems.
This week I wanted to discuss pumps, dosing pumps in particular. Many of our customers want to combine flow meters with pumps and as a result we frequently get asked the same questions.
Option 1) Add a flow meter between the pump and the process
By adding a flow meter between the pump and the process, you can take information from the flow meter to adjust the speed of the pump. Traditionally, this would be managed with an analogue output signal, 4….20 mA or similar, from the flow meter into a separate PID controller that compares the real flow signal to the desired flow. Subsequently, the electronic controller can then adjust the speed of the pump to achieve the desired dose or flow.
Using this solution will mitigate the issues in the original solution, however it introduces more:
Option 2) Direct mass flow measurement with a flow meter with built in PID control
Now we need to discuss the next possible solution, using a direct Mass Flow measurement device with built in PID control that can drive a pump to achieve the desired dose or flow. With this solution you do not need to include the pump in the control system, just give a set point demand to the mass flow meter and it will drive the pump to achieve the desired dose or flow. This solution will give you several advantages, such as:
Anywhere that liquid is dispensed into a container that will require quality assurance, and commonly the quality control test is carried out on a small percentage of the vials to ensure general compliance. If you use a mass flow meter to control the dose you can achieve 100% QC checking of your product with reduced human input.
If you need to dose additives, performance chemicals or mix liquids then the ability to control the flow of the additive and know what that flow is can be a huge advantage to the outcome of the application.
Check out our CORI-FILL Technology for ultra fast and precise batch dosing