We offer the widest product range of low-flow (mass) flow meters and controllers on the market. Numerous styles of both standard and bespoke instruments can be offered for applications in laboratory, machinery, industry and hazardous areas.
Customer satisfaction, innovation and quality of product and service have been the cornerstones of Bronkhorst's success. Based on our experience, innovation and sense of responsibility, a relationship with Bronkhorst assures Performance for Life.
Bronkhorst instruments are used for numerous applications in many different markets. In this section you will find an overview of the main markets for our equipment, illustrated with some typical examples of applications.
Are you looking for technical documentation, are you interested to learn more about the measuring principles of Bronkhorst products, or you do want to get in contact with a Bronkhorst Service Engineer? This section will guide you to the relevant service & support topics.
Bronkhorst High-Tech BV the leaders in Mass Flow Meter / Mass Flow Controller technology for gases and liquids, Pressure Controllers and Evaporation Systems.
Liquefied gases have to be dosed in the liquefied state to the relevant application, which operates at high pressures (up to several hundreds of bars). For accurate dosing of liquefied gases, the process conditions, especially pressure and temperature, have to be such that outgassing of the liquid will be avoided. Especially at low flows, it should be monitored that the required amount of liquid is actually dosed.
The process solution for dosing liquefied gases consists of a WADose HP Lite pump with an attached heat exchanger, combined with a Bronkhorst Coriolis mass flow controller and an EL-PRESS pressure meter. The function of the heat exchanger is to cool the pump head to below freezing temperature, in order to stimulate liquid forming and to prevent cavitation and outgassing. This to avoid pressure fluctuations and an unsteady liquid flow when dosing the chemical compounds. Flowbus is used as a standard communication protocol between the pump and the mass flow controller.
The combination of the WADose piston pump and the Coriolis mass flow controller allows for an accurate dosing of the liquefied gases. Stand-alone piston pumps are not hermetically tight and exhibit wear over time. Therefore, their setpoint may deviate from the real amount of chemical compound dosed, which is especially at stake when dosing low flows in the range of ml/min. In the current combination, the dosed quantity is accurately measured in-situ using the Coriolis mass flow controller, and this device controls the pump by adjusting the flow. This self-monitoring control circuit works continuously, making sure that the solution doses what it should do, so that ‘you know what you pump’ in real-time. Prior to using this solution, the supply of liquefied gases typically occurred uncontrolled, thus lacking necessary precision.
This process solution boosts liquefied gas, typically from a gas cylinder, into a liquid at a higher pressure of about 200 bars. The pressure is monitored by a digital electronic pressure meter - for measuring the process pressure as well as for safety functionality. This is to be sure that the pressure does not get higher than the devices or vessels in the process can withstand, to protect those components. No extra safety relief valves are necessary in this way.
In addition to the mass flow rate - which is fluid-independent - the mass flow controller also continuously measures the density of the chemical compound. This is an extra measure of monitoring whether or not the compound is fully in its liquid state - and to which can be responded immediately. Also the temperature of the dosed compound is monitored by the mass flow controller.
This pump/controller combination is a complete plug-and-play solution without any engineering hours needed to be spent. Control parameters are easy to modify using the intuitive interface.
Carsten Neutzer: "You know what you pump - in real-time".