Bronkhorst

MAG-VIEW MVM-002-Q

Low-Flow Magnetic Inductive Flow Meter for water-like liquids

  • Compact, weatherproof (IP65) design
  • No moving parts (no mechanical wear)
  • Interference free operation
  • Independence to inlet/outlet pipework
  • Fast response
  • Free pipe cross section: low ΔP, insensitive to contamination
  • Cost-optimized (plastic) model
MASSFLOW-ONLINE product
  Get a quote Downloads Buy now Support
MAG-VIEWMVM-002-Q

Electromagnetic flow meters for low flow rates of water and aqueous solutions

MAG-VIEW instruments are electromagnetic inductive flow meters for electrically conductive liquids with a minimum conductivity of 20 μS/cm. The compact, weatherproof (IP65) flow meters do not contain any moving parts, cause virtually no pressure loss and can be mounted in any position, requiring no straight inlet or outlet runs.

MAG-VIEW flow meter model MVM-002-Q is a cost-efficient instrument with a DN3 PVDF measuring tube for flow rates of 0,1…2 l/min, suited for operating pressures up to 10 bar(g). The pulse output of the instrument is proportional to the flow.


Technical specifications

Measurement / control system
Flow rates0,1 2 l/min
Accuracy (incl. linearity) (based on actual calibration)± 1 % RD
Repeatability1 % FS
Turndown ratio1:20 (5...100%)
Signal output starting from~ l/min
Response time (sensor)< 100 msec
Operating temperature maxMedium -10...60°C, Ambient 5...60°C, not freezing
Flow indicationblinking green LED
Mechanical parts
Material (wetted parts)Electrodes and grounding rings: Stainless Steel 316L Measuring pipe: PVDF Process connections: PVDF
HousingABS
DiameterDN3
Process connections3/8" BSP male thread
SealsNone
Ingress protectionIP65
Electrical properties
Power supply24 Vdc ±10
Max. power consumption0,6 W
Electrical protection measuresShort-circuit proof, protected against polarity reversal
Electrical connection4-pin-plug M12x1
Electrical connection
Control valve options
External actuator options to be connected to the controller
Ex-proof specifications
Approvals / certificates

Technical specifications subject to change without notice.

For dimensional drawings and hook-up diagrams please visit the product page on our website

Downloads

Brochures
MAG-VIEW Brochure



Bronkhorst USA inc.

57 South Commerce Way
Suite 120
USA - Bethlehem, PA 18017 
Tel.  +1-610-866-6750
[email protected]

     
Copyright © 2020 Bronkhorst. All rights reserved.     Sitemap     Disclaimer     Privacy note