We offer the widest product range of low-flow mass flow meters on the market. Numerous styles of both standard and bespoke instruments can be offered for applications in laboratory, machinery, industry and hazardous areas.
Customer satisfaction, innovation and quality of product and service have been the cornerstones of Bronkhorst's success. Based on our experience, innovation and sense of responsibility, a relationship with Bronkhorst assures Performance for Life.
Bronkhorst instruments are used for numerous applications in many different markets. In this section you will find an overview of the main markets for our equipment, illustrated with some typical examples of applications.
Are you looking for technical documentation, are you interested to learn more about the measuring principles of Bronkhorst products, or you do want to get in contact with a Bronkhorst Service Engineer? This section will guide you to the relevant service & support topics.
Bronkhorst High-Tech BV the leaders in Mass Flow Meter / Mass Flow Controller technology for gases and liquids, Pressure Controllers and Evaporation Systems.
Let me start with explaining what demineralised water is. Demineralised water, also known as demi water, is purified water and is often used in laboratory applications for industrial and scientific purposes. However, also in your everyday life you will encounter applications with demi water.
For example for ironing your clothes with a steam iron, demi water can be used to avoid lime scale in your iron. But it is also used in car wash installations. A thin layer of demi water is sprayed over the car at the end of the car wash program to avoid dried up drops on your car. At the end of this document a few examples of the use of suitable Bronkhorst instruments are given.
Demineralised water is water that has been purified in such a way that (most of) its mineral- and salt ions are removed. You can think for example of Calcium, Chloride, Sulphate, Magnesium and Sodium. Demineralised water is also known as demi water or deionised water. Demineralised water is generally considered different from distilled water. Distilled water is purified by boiling and re-condensing. In this way salt ions are being removed.
The major difference between demineralised water and distilled water is that distilled water usually has less organic contaminants; deionisation does not remove uncharged molecules such as viruses or bacteria. Demineralised water most times has less mineral ions; this is dependent on the way it is produced. Deionisation has a cleaner production and it leaves behind less scale in the installations it is used in.
A point of attention when using this demineralised water is the material of your instruments. Not all material is suited to serve as a piping material for demi-water; this also depends on temperatures that are used.
Demineralised water is produced via three main routes:
Demineralised water is used for industrial and scientific purposes. You can think of the following applications:
Demineralised water, which is completely filtered of minerals via (electro) ion-exchange, distillation, membrane filtration or other production methods, you would think that it could be used as drinking water. However, as with all things, there are advantages and disadvantages to drinking demineralised water. The advantage is that the minerals that are bad for us have been taken out. There is a lot of documentation available about bad influences of certain minerals on our bodies. The big disadvantage of drinking demineralised water, however, is that demi water takes out also the good minerals from our body and causes a shortage so our health system cannot function properly anymore. Summarised: demi-water should not be used for drinking water as it removes minerals that are needed for a good health.