We offer the widest product range of low-flow mass flow meters on the market. Numerous styles of both standard and bespoke instruments can be offered for applications in laboratory, machinery, industry and hazardous areas.
Customer satisfaction, innovation and quality of product and service have been the cornerstones of Bronkhorst's success. Based on our experience, innovation and sense of responsibility, a relationship with Bronkhorst assures Performance for Life.
Bronkhorst instruments are used for numerous applications in many different markets. In this section you will find an overview of the main markets for our equipment, illustrated with some typical examples of applications.
Are you looking for technical documentation, are you interested to learn more about the measuring principles of Bronkhorst products, or you do want to get in contact with a Bronkhorst Service Engineer? This section will guide you to the relevant service & support topics.
Bronkhorst High-Tech BV the leaders in Mass Flow Meter / Mass Flow Controller technology for gases and liquids, Pressure Controllers and Evaporation Systems.
I’ve worked at Bronkhorst France since 10 years now and I must confess, the instrumentation career brings me to discover new applications in various markets even today. Markets like the chemical industry, environmental industry, research applications and so on, for which flow control and measurement solutions are often essential. The applications in which supercritical fluids are used, are often complex because of the fluids state.
It was during one of my visits that I met Jérémy Lagrue, director and founder of SFE Process. I discussed with him the use of Coriolis flow meters in supercritical CO2 processes.
Supercritical CO2 is, I believe, the most known supercritical. It is an important commercial and industrial solvent due to its role in chemical extraction in addition to its low toxicity and environmental impact.
Supercritical CO2 can be found in extraction processes, such as algae, oils, flavors and active principles. It is also used in splitting processes, such as drinks fermentation, deodorization of fatty substances in the field of cosmetics and purification processes for polymers.
This inert fluid is interesting because it reaches its supercritical phase at a relatively low pressure (73.8 bara) and a low temperature (31.1 °C.). The relatively low temperature of the process and the stability of CO2 also allows most compounds to be extracted with little damage or denaturing.
Carbon dioxide usually behaves as a gas at standard temperature and pressure (STP) or as a solid called dry ice when frozen. If the temperature and pressure are both increased from STP to be at or above the critical point for carbon dioxide, it can adopt properties midway between a gas and a liquid. More specifically, it behaves as a supercritical fluid above its critical temperature (31.1°C) and critical pressure expanding to fill its container like a gas but with a density like that of a liquid.
Besides, CO2 offers the advantage of being odorless, non-toxic and non-flammable. It does not alter the product to be extracted or purified.
For environmental reasons, more and more industries tend to use supercritical CO2 in their process because it is positioned as an alternative to organic solvents. Indeed, unlike solvents that are produced from petroleum, CO2 is naturally available and abundant, it is therefore less expensive. However, there are very few solutions to implement it because installations remain expensive.
Jérémy Lagrue: “At SFE Process, we’re dealing with applications in high pressure equipment and accessories. The specialty of SFE Process, is the production of special machines or devices for supercritical fluids (like CO2). We supply also consulting, metrology advice, maintenance, and training. SFE has developed an innovative design of high pressure pumps for processes with supercritical fluids, used either to compress liquid CO2 up to 1000 bar or for supercritical recirculation.”
“Our customers that are active in the chemical market, such as bio technology or pharmaceutical market, want to inject CO2 into a process of molecule separation or fraction. The goal here is separation of the molecules. To realize this separation, special equipment is necessary. SFE Process manufactures this type of equipment, moreover, they manufacture the pump to generate the flow of this particular fluid. The most important requirements of these pumps are stability, repeatability and accuracy.”
“I wanted to offer my customers the possibility to establish their mass balance in these chemical processes. Since I’ve worked a long time with many industries and laboratories, I know the importance of the flow parameter in order to determine the efficiency of the process, its production cost, its yield and to make the transition from laboratory scale to industrial scale.”
SFE Process has good experience in supercritical CO2 but they needed to prove the reliability of the equipment and also guaranty that CO2 injection is highly accurate and repeatable.
“The problem was to find an accurate and reliable flow meter capable of guaranteeing the veracity of the results and of course that lends itself perfectly to the use of supercritical CO2. I chose the Coriolis flow meter) offered by Bronkhorst. In addition to its design, the reputation of this flow meter and the 3 year manufacturer warranty had influenced my decision making and the tests carried out with this flow meter met my expectations.”
“The improvement that I experience is that final customers can be sure of the quantity of the fluid they put in their process. SFE Process can justify the good accuracy and repeatability of the pump by way of flow measurement of the Coriolis flow meter. So accuracy has improved.
I’ve integrated the Coriolis flow meter into all the equipment that I offer to users with the fundamental need to build up their mass balance and refer to a reliable flow value.”
Have a look at our video explaining the principle of operation of our Coriolis products