We offer the widest product range of low-flow (mass) flow meters and controllers on the market. Numerous styles of both standard and bespoke instruments can be offered for applications in laboratory, machinery, industry and hazardous areas.
Customer satisfaction, innovation and quality of product and service have been the cornerstones of Bronkhorst's success. Based on our experience, innovation and sense of responsibility, a relationship with Bronkhorst assures Performance for Life.
Bronkhorst instruments are used for numerous applications in many different markets. In this section you will find an overview of the main markets for our equipment, illustrated with some typical examples of applications.
Are you looking for technical documentation, are you interested to learn more about the measuring principles of Bronkhorst products, or you do want to get in contact with a Bronkhorst Service Engineer? This section will guide you to the relevant service & support topics.
Bronkhorst High-Tech BV the leaders in Mass Flow Meter / Mass Flow Controller technology for gases and liquids, Pressure Controllers and Evaporation Systems.
The first Variable Area (VA) meter with rotating float was invented by Karl Kueppers in Aachen in 1908. The device was patented in Germany that same year. Felix Meyer was among the first to recognize the significance of Kueppers’ work and implemented the process for offering the meter for sale. In 1909, the firm of "Deutsche Rotawerke GmbH" was created in Aachen (Germany). They improved this invention with new shapes of the float and of the glass tube. It didn’t take long for the new device to capture attention in Europe, the United Kingdom, and other areas.
Over time, different types of VA flow meters (also called purge meter) have been developed, usually in response to some specific need. Nowadays a purge meter usually consists of a tapered tube, typically made of glass or plastic. Inside this tapered tube there is the ‘float’ which is made either of anodized aluminum or a ceramic. The ‘float’ is actually a shaped weight that is pushed up by the drag force of the flow and pulled down by gravity. The drag force for a given fluid and float cross section is a function of flow speed squared only.
While the meters are still relatively simplistic in design, relatively low cost, low maintenance and ease of installation they are widely used in many kinds of application. Despite these facts, the traditional VA meter has a number of drawbacks. For instance, graduations on a given purge meter will only be accurate for a given substance at a given temperature and pressure. Either way, due to the direct flow indication, the resolution is relatively poor anyway. Especially when they are built into a machine, reading might be hard. Moreover, the float must be read through the flowing medium, so you can imagine that some fluids may obscure the reading.
As for the current century, Bronkhorst developed the MASS-VIEW flow meter series which is the digital high-tech alternative to these traditional VA meters. Thanks to today’s digital possibilities, many other advantages arises for many industrial processes and chemical plants.
A VA meter, whether it is a conventional or a digital one, can be equipped with a built-in needle valve. This needle valve enables the user to regulate the flow rate by means of a restriction inside the flow channel. As long as the inlet pressure is stable, the subsequent flow will be stable too. On the other hand, once pressure conditions are susceptible to change, the flow rate will become equally unstable. If this is not desirable, you’ll have to compensate these pressure fluctuations.
This effect can be eliminated by using a manual control valve like the FLOW-CONTROL series which keeps the pressure drop across the needle valve (delta-P) constant. This is accomplished by a second (normally open) valve, though it is operated by a membrane this time. The operating principle is based on a balance that forms between the pre-pressure, back-pressure and the spring force on the mebrane. A change in the pressure conditions leads to a change of the equilibrium and thus a change in the valve position as well (as shown in the picture below).
Although Bronkhorsts’ pressure compensation technology is suitable for either gases and liquids, the nice thing about this is that both technologies, the digital VA meters and pressure compensation, lend themselves well to being built together. However, in that case it is applicable for gases only.