We offer the widest product range of low-flow (mass) flow meters and controllers on the market. Numerous styles of both standard and bespoke instruments can be offered for applications in laboratory, machinery, industry and hazardous areas.
Customer satisfaction, innovation and quality of product and service have been the cornerstones of Bronkhorst's success. Based on our experience, innovation and sense of responsibility, a relationship with Bronkhorst assures Performance for Life.
Bronkhorst instruments are used for numerous applications in many different markets. In this section you will find an overview of the main markets for our equipment, illustrated with some typical examples of applications.
Are you looking for technical documentation, are you interested to learn more about the measuring principles of Bronkhorst products, or you do want to get in contact with a Bronkhorst Service Engineer? This section will guide you to the relevant service & support topics.
Bronkhorst High-Tech BV the leaders in Mass Flow Meter / Mass Flow Controller technology for gases and liquids, Pressure Controllers and Evaporation Systems.
Anglian Water Services cleans water to the highest standard, delivers it to millions of homes, and carefully manages it to ensure it never runs out in an area of the UK. They started a project to optimize and further control dosing of phosphates in the public water system.
Public water systems commonly add phosphates to the drinking water as a corrosion inhibitor to prevent the leaching of lead and copper from pipes and fixtures. Inorganic phosphates (e.g. phosphoric acid, zinc phosphate, and sodium phosphate) are added to the water to create orthophosphate, which forms a protective coating of insoluble mineral scale on the inside of service lines and household plumbing. The coating serves as a liner that keeps corrosion elements in water from dissolving some of the metal in the drinking water. As a result, lead and copper levels in the water will remain low and within the norms to protect the public health.
In the original process a down-steam analyser was in-place to measure the concentration of orthophosphoric acid in the main flow. The measurement results were checked against the required concentration and used to adjust the pump speed and therefore the level of orthophosphoric acid in the main flow. With this process Anglian Water Services can secure copper and lead concentration levels in the water acceptable to protect the public health. Nevertheless the process had room for improvement, which will be discussed in this blog.
The reactive feed-back loop mechanism for dosing phosphates was not a preferred working method. We could not react quickly enough to the changing main flow to reduce or increase the dose proportionally. We had to ensure that we dosed to a level meeting the legal requirements assuming the station was processing maximum flow. Secondary costs were added to the system by needing double redundancy on the analyser to ensure there is no break in the measurement of orthophosphoric acid levels.
Two sensor technologies were evaluated to enhance the process; Differential Pressure and Coriolis technology. The Differential Pressure instrument was the most cost effective and allowed us to meter the Orthophosphoric acid flow as a volume, it would take an analogue signal input and adjust the dose proportionally to the main flow.
The Coriolis mass flow meter utilizes direct mass flow measurement, which is preferable over volume flow for this application and is more accurate and repeatable, but is more expensive. It would also take an analogue signal input and adjust the dose proportionally to the main flow.
Making a decision appeared to be based around return on investment. Essentially the time taken to generate sufficient savings. However, during the demonstration of the Coriolis Mass Flow Meter we learned something new that would change the direction of our final design. The Coriolis Mass Flow Meter gave the density of the fluid being metered as an output.
Phosphoric acid it sold in diluted concentrations, usually 80% in solution. What we have found is that there is a variation in the actual concentration at the point of use.
At this point we already knew that either the Differential pressure or Coriolis technology could support us to enhance the process of record. Now we had the chance to go to the next level and take a previously unavailable but very important parameter and use it to really refine the dose ratio.
The extra density parameter available with the Coriolis Mass Flow Meter made the decision for us. Dosing would now be controlled proportionally to the main flow and the density/quality of the phosphoric acid being used.
As we look to go live on the first five installations of this technology, we are projecting the following:
At Anglian Water Serices they live with a Love Every Drop approach. The Love Every Drop approach is a vision for how they believe a modern utilities company should be run. That vision means creating a country with a resilient environment that enables sustainable growth and can cope with the pressures of climate change. Creating infrastructure that is affordable and reliable, meeting the needs of customers, communities and the environment. We want our people and our communities to be resilient too. Phosphoric acid is connected with the concept of planetary boundaries according to Rockström et al. 2009. Anglian Water Services was able to reduce the consumption of phosphoric acid in their processes without sacrificing the quality of the water. This fits with the way they run their business.
Our water treatment specialist are more than happy to help you face your challenges in water treatment. Send us your questions!