We offer the widest product range of low-flow mass flow meters on the market. Numerous styles of both standard and bespoke instruments can be offered for applications in laboratory, machinery, industry and hazardous areas.
Customer satisfaction, innovation and quality of product and service have been the cornerstones of Bronkhorst's success. Based on our experience, innovation and sense of responsibility, a relationship with Bronkhorst assures Performance for Life.
Bronkhorst instruments are used for numerous applications in many different markets. In this section you will find an overview of the main markets for our equipment, illustrated with some typical examples of applications.
Are you looking for technical documentation, are you interested to learn more about the measuring principles of Bronkhorst products, or you do want to get in contact with a Bronkhorst Service Engineer? This section will guide you to the relevant service & support topics.
Bronkhorst High-Tech BV the leaders in Mass Flow Meter / Mass Flow Controller technology for gases and liquids, Pressure Controllers and Evaporation Systems.
As the demand for natural and healthier ingredients (such as sweets with vitamins) increases, manufacturers of chocolate and sweets often decide to change the existing artificial flavours, aromas and colours, into more natural additives. Because these additives are more expensive and have changing fluid properties (e.g. density and viscosity), traceability and an accurate process are desired.
The desired flow solution should provide detailed process information, more efficient production lines, better product consistency and higher quality of the overall process. For this we have developed an ultrasonic flow meter for small liquid volume flows called the ES-FLOW.
Worldwide the confectionery industry is expected to grow towards 275 billion dollar in 2025, an enormous market. Looking into that, America is number 1 in terms of candy retail volume, but if you measure the consumption per capita, it seems the European countries win the battle. Germany has the highest consumption per capita (according to market data and estimates from Euromonitor in 2016).
Market suppliers continuously learn from the market to keep adding value to the daily life of their customers. A sustainable supply chain, improvement of the well-being of consumers and continuous product innovation are required to support the long term needs of this market.
At the same time, trends have been observed in recent years towards a continuous production process, prevention of waste, shorter downtimes and higher flexibility, not only in the food sector but also in the chemical industry.
The use of additives – flavours, aromas and colours - requires that small flow rates are measured and controlled. For this, not many solutions can be found. Nowadays many confectioners use dosing pumps and rely on positive displacement. But how to be sure that the desired volume was actually displaced? Was the pump head completely filled with liquid? Or did (partly) dry-running occur?
Dosing pumps are often calibrated or programmed for a set fluid and flow rate. For changing process conditions or production changeovers this usually needs to happen again, which could lead to long down times. The ES-FLOW ultrasonic volume flow meter has an integrated PID controller that can be used to operate pumps and valves. This allows the user to build a complete automated control circuit with fast response times.
In close collaboration with TNO (a Dutch organization for applied scientific research) we managed to develop an instrument using Ultrasonic Wave Technology. This technology is applied in the ES-FLOW ultrasonic flow meter series for measuring and controlling liquid volume flows between 4 to 1500 ml/min independent of liquid density, temperature and viscosity with an accuracy of 1% of rate ± 1 ml/min.
Many companies have changing process conditions and often use a variety of additives and solvents. The ES-FLOW ultrasonic volume flow meter is liquid-independent, therefore recalibration is not needed. Also non-conductive liquids, such as distilled and demineralised water or solvents can be measured. In addition to this, the sensor is insensitive to surrounding vibrations.
The instrument is designed according to hygienic standards with a self-drainable straight sensor tube, surface roughness ≤ 0.8 µm and no dead volume. Therefore particles or bacteria cannot accumulate easily and contaminate the sensor tube. As a result the cleaning process only takes a few minutes, which minimises downtimes.