We offer the widest product range of low-flow mass flow meters on the market. Numerous styles of both standard and bespoke instruments can be offered for applications in laboratory, machinery, industry and hazardous areas.
Customer satisfaction, innovation and quality of product and service have been the cornerstones of Bronkhorst's success. Based on our experience, innovation and sense of responsibility, a relationship with Bronkhorst assures Performance for Life.
Bronkhorst instruments are used for numerous applications in many different markets. In this section you will find an overview of the main markets for our equipment, illustrated with some typical examples of applications.
Are you looking for technical documentation, are you interested to learn more about the measuring principles of Bronkhorst products, or you do want to get in contact with a Bronkhorst Service Engineer? This section will guide you to the relevant service & support topics.
Bronkhorst High-Tech BV the leaders in Mass Flow Meter / Mass Flow Controller technology for gases and liquids, Pressure Controllers and Evaporation Systems.
A coupling manufacturer employs a test setup for a specific type of gas couplings that are used for the United States market. These gas couplings need to be gas tight during a certain minimum period of time in the occasion of fire.
The testing is conducted as follows: the gas coupling is mounted at the end of a tube, which is put in a furnace that is heated to a certain constant temperature. Then this coupling-tube setup is subjected to 10 bars (139.5 psi) of air overpressure. A coupling passes the test when the air leakage during a certain amount of time is below a prescribed value. As this is a destructive testing method, not all gas couplings from a batch are tested, but only a few. In the original setup, the pressure sensor malfunctioned often, because of the high flow (it was a flowmeter based on the pressure drop principle). With the Bronkhorst Flow-Pressure Solution the flow cannot be higher than the full scale range of the MFC.
The coupling manufacturer needed a compact plug & play system, which is easy to operate with only one input and one output for the air flow and the rest ‘out of sight’. Furthermore, a filter is necessary to prevent soot from the furnace entering the measuring device.
Bronkhorst’s Flow-Pressure Solution comprises a pressure meter (Bronkhorst EL-PRESS PM51 pressure module), which is a sensor that controls a flow controller upstream. When the gas coupling fails during testing, the pressure meter detects a pressure that is lower than the initial 10 bars, after which it forces the flow controller to generate an air flow to the system. At that point, when this flow has a non-zero value, indeed a leakage is detected. According to the coupling manufacturer, the system is robust with reliable pressure sensing.
For this leakage testing application, a combination of a pressure meter (e.g. EL-PRESS series) with a flow controller (e.g. EL-FLOW series) is better than a traditional combination of a pressure controller with a flow meter. In the latter case, there may be a risk of losing signal in the initial period when a pressure controller wants to reach its setpoint very fast. The advantage of Bronkhorst’s setup is that the generated flow can never be too high.
The setup comprises a 15 μm filter to prevent soot particles from the furnace to enter the flow controller, which is detrimental for this device. In case of blockage, this filter can be cleaned by back-flushing of air, so there is no need for disassembling the setup to clean the filter. By default, the setup is delivered with a digital control pane to control and display the settings. Via an RS-232 serial port the control panel can be connected to a computer system using Bronkhorst’s own software. If desired a modification can be made where a potentiometer is incorporated to adjust the settings manually. This modification includes analog-to-digital switch.