LIQUI-FLOW™ 'Industrial Style' L30C5I

Digital Thermal Liquid Mass Flow Controller, Industrial Style

  • Fast and accurate measuring signal
  • Insensitive to mounting position
  • Suitable for liquids with low boiling points
  • Analog, RS232 or fieldbus communication
  • Rugged, IP65 enclosure
Get a quote Downloads Support
LIQUI-FLOW™ 'Industrial Style'L30C5I

Liquid Mass Flow Controllers for low flow rates, industrial style

Bronkhorst® model L30C5I Liquid Flow Controllers (LFCs) are suited for precise measurement and control of flow ranges between 0,04…2 kg/h and 0,4...20 kg/h at operating pressures up to 100 bar. The LFC consists of a thermal mass flow sensor and a microprocessor based pc-board with signal and fieldbus conversion and a PID controller for mass flow control by means of an integrated control valve. The "Industrial Style" LIQUI-FLOW™ model is of rugged design (IP65) for use in industrial environments.

LIQUI-FLOW™ series are equipped with a digital pc-board, offering high accuracy, excellent temperature stability and fast response. The main digital pc-board contains all of the general functions needed for measurement and control. In addition to the standard RS232 output the instruments also offer analog I/O. As an option, an on-board interface can be mounted to provide DeviceNet™, PROFIBUS DP, Modbus or FLOW-BUS protocols.

Technical specifications

Measurement/Control system
Flow range, based on H2O
(intermediate ranges available)
min. 0,04…2 kg/h
max. 0,4...20 kg/h
Accuracy (incl. linearity)
(based on actual calibration)
±1% FS
Turndown 1:50 (2...100%)
Repeatability < 0,2% FS (typical H2O)
Settling time standard: 4...10 seconds;
on request: 1...2 seconds
Max. Kv-value 6,93x10-2
Max. fluid viscosity 0.1 Pa*s
Operating temperature 5…70°C
Temperature sensitivity ±0,1% FS/°C
Attitude sensitivity negligible
Warm-up time 30 min. for optimum accuracy;
3 min for accuracy ± 2% FS
Mechanical parts
Material (wetted parts) stainless steel 316L/320;
others on request
Pressure rating 100 bar abs
Max. ΔP 5...40 bar dif. (depending on Kv-value)
Process connections compression type or face seal couplings
Purge connection 1/8” OD compression type or 1/8" VCR
Seals metal
Valve seat Kalrez®-6375;
others on request
Ingress protection (housing) IP65
Electrical properties
Power supply +15…24 Vdc +/-10%
Power consumption max. 22 W
PROFIBUS DP add 53 mA (15 V supply) or 30 mA (24 V supply)
DeviceNet™ add 48 mA (24 V supply)
Analog output/command 0...5 (10) Vdc or 0 (4)...20 mA (sourcing output)
Digital communication standard: RS232;
options: PROFIBUS DP, DeviceNet™, Modbus RTU, FLOW-BUS
Electrical connection
Analog/RS232 8 DIN (male)
PROFIBUS DP bus: 5-pin M12 (female);
power: 8 DIN (male)
Devicenet™ 5-pin M12 (male)
FLOW-BUS/Modbus-RTU 5-pin M12 (male)

Technical specifications and dimensions subject to change without notice.

For dimensional drawings and hook-up diagrams please visit the productpage on our website


LIQUI-FLOW series L30 Brochure

General manual digital instruments
Operating instructions digital instruments

Hook-up diagrams
Analog IO - RS232

Bronkhorst High-Tech B.V.

Nijverheidsstraat 1A
NL-7261 AK Ruurlo (NL)
Tel. +31 573 45 88 00
[email protected]

Copyright © 2019 Bronkhorst. All rights reserved.     Sitemap     Disclaimer     Privacy note