Bronkhorst

IN-LINE Filter

Ultra Low Flow Serie M-410

  • 질량 유량계/컨트롤러 전용 필터
  • MTBF 개선 목적 (Mean Time Between Failure)
  • 316L 소결 금속 필터 카트리지
  • 하우징: AISI 316
  • 오링: Viton; 옵션 EPDM 및 FFKM (Kalrez)
Get a quote 다운로드 Support
IN-LINE Filter<br /><H2>Ultra Low Flow Serie M-410</H2>
IN-LINE Filter<br /><H2>Ultra Low Flow Serie M-410</H2>
IN-LINE Filter<br /><H2>Ultra Low Flow Serie M-410</H2>

Description

Inherent to its construction, a thermal mass flow meter or controller for gases is sensitive to contamination. To increase the MTBF (Mean Time Between Failure) it is important to make sure that the gas entering the instrument is clean. The IN-LINE Filter Assembly, screwed into the inlet of the instrument, provides this service. It contains a 316L sintered metal filter cartridge that is suitable for general purpose filtration and can be cleaned with a suitable solvent. If the gas contains a large particulate content, we advise the use of a pre-filter.

 

Selection

This Ultra Low Flow filter has a ⅛” female thread at the inlet and a ⅛” male tread on the outlet.The M-410 series has a porosity (µm) of 0.5, 2, 7 or 15 μm, depending on the model. The pressure rating for this model is 100 bar. The ΔP across the IN-LINE filter can be calculated with the help of our online calculation tool FLUIDAT on the Net.

Technical specifications

Available models
Model no. Average porosity (µm) Connections in Connections out Pressure rating
M-410-13 0.5 1/8" female 1/8" male 100 bar
M-410-16 2 1/8" female 1/8" male 100 bar
M-410-18 7 1/8" female 1/8" male 100 bar
M-410-20 15 1/8" female 1/8" male 100 bar

Dimensional drawings

Downloads

Brochures
Filters brochure
Dimensional drawings
Dimensional Drawing M-410 / M-420
Dimensional drawings
도면 및 배선연결 정보 제품 페이지 우리의 웹사이트



BRONKHORST KOREA Co. Ltd

경기도 화성시 동탄순환대로 830 SK
V1 Center 209호
대표자 : 헨드리크제지너스타펠
사업자등록번호 : 119-86-74469

           Social Responsibility
Copyright © 2024 Bronkhorst. All rights reserved.     Sitemap     Disclaimer     Privacy note