Bronkhorst

mini CORI-FLOW Ex d XM12

Explosieveilige Coriolis massflowmeter en -regelaar voor lage flow

  • Hoge nauwkeurigheid, uitstekende herhaalbaarheid
  • Snelle respons
  • Onafhankelijk van de fysische eigenschappen
  • Additionele dichtheid en temperatuur output
  • IECEx en ATEX Zone 1 gecertificeerd
Vraag offerte aan Downloads Datasheet
mini CORI-FLOW Ex dXM12

Ex-proof Coriolis massflowmeters/regelaars voor lage flow

De mini CORI-FLOW Ex d massflowmeters zijn nauwkeurige en compacte instrumenten voor lage flow, gebaseerd op het Coriolis-meetprincipe, ingebouwd in een explosiebestendige behuizing voor gebruik in explosiegevaarlijke omgevingen van IECEx en ATEX Zone 1, ATEX-goedkeuring II 2 G Ex d e IIB T6 Gb. Type XM12 massflowmeter (MFM) is geschikt voor zeer nauwkeurige meting van gas- of vloeistof in een flowbereik van 0...200 g/h (wat overeenkomt met 0...2,66 ln/min bij gebruik op stikstof) bij werkdrukken tot 138 bar (a).

Het instrument bevat een intelligente signaal- en veldbusconversie en een PID-regelaar voor de massflowregeling bij gebruik van een regelventiel of pomp. 


Technische specificaties

Meet- / regelsysteem
FlowLiquid: 0…200 g/h (nominal flow rate: 100 g/h);
Gas: 0…2,66 ln/min (N2);
Full Scale (FS) value is user-configurable
Nauwkeurigheid massflowmetingLiquid: ±0,2% Rd;
Gas: ±0,5% Rd
Herhaalbaarheid±0,05% of rate ± ½(ZS* x 100/actual flow)%
Turndown ratioMeter: up to 1:100;
Controller: ≥ 1:50
Nulpunt stabiliteit (ZS)< ± 0,02 g/h
(Guaranteed at constant temperature and for unchanging process and environmental conditions.)
Responstijd (sensor)200 msec
Settling time (in regeling, typisch)1 sec. (typical)
TemperatuurbereikAmbient temperature range: 0…55°C;
Process temperature range: 0…70°C
Temperatuureffecton zero: < 0,01 g/h/°C;
on span: < 0,001% Rd/°C;
self heating (at zero flow): < 15°C
(Depends on flow rate, heat capacity fluid, T amb., T fluid and cooling capacity.)
MontageAny position, attitude sensitivity negligible.
External shocks or vibrations should be avoided.
Nauwkeurigheid temperatuurmeting± 0,5°C
Nauwkeurigheid dichtheidsmeting< ± 5 kg/m³ (bij full-scale flow)
Lekdichtheid, naar buitengetest < 2 x 10-9 mbar l/s He
Opwarmtijd> 30 min. for optimum accuracy
Mechanische delen
Sensorsingle tube, DN 0,25
KlepzittingKalrez®-6375, other on request
(for controllers)
Materiaal (onderdelen die in contact komen met het medium)stainless steel 316L or comparable
Drukclassificatie138 bar a
Procesaansluitingen1/8" OD compression type (welded);
other on request
Afdichtingenmetal
Beschermingsgraad (behuizing)IP66
Elektrische eigenschappen
Stroomvoorziening+15…24 Vdc +/- 10%
Max. ripple recommended: 50 mV tt
Max. stroomverbruikMeter: max. 3 W;
Controller: max. 7 W
Analoog signaal0…5 (10) Vdc, min. load impedance > 2 kΩ;
0 (4)…20 mA (sourcing), max. load impedance < 375 Ω;
on request: Ex i output 4…20 mA
Analoog setpoint(for MFM + pump or control valve)
0…5 (10) Vdc, min. load impedance > 100 kΩ;
0 (4)…20 mA (sourcing), max. load impedance ~ 250 Ω
Digitale communicatiestandard: RS232
options: PROFIBUS DP, DeviceNet™, Modbus RTU of FLOW-BUS
Elektrische aansluitingAll instrument connections are wired to screw terminals
Elektrische aansluiting
Control valve options
Externe actuatoropties die op de controller moeten worden aangesloten
Elektromagnetische regelklep (Bronkhorst®)C2I valve with XC coil or XB coil through barrier
Pneumatisch bediende regelklep (Badger Meter)RC200 valve with Ex d TEIP11 I/P converter
Massastroommeter gestuurde pompPump with ATEX zone 1 U/f converter
Certificering voor explosiegevaarlijke zones
Goedkeuringen (MFM)ATEX: II 2 G Ex d e IIB T6 Gb | DEKRA 12ATEX0144X |
IECx: Ex d e IIB T6 Gb | IECEx DEK 12.00400 |
TIIS Zone 1 / JP Ex IIB T6 Gb | DEK 19.0041 |
Goedkeuringen / certificaten

Technische specificaties kunnen zonder kennisgeving worden gewijzigd.

Voor technische maattekeningen en aansluitschema's bezoekt u de productpagina op onze website

Downloads

Brochures
mini CORI-FLOW Ex d brochure
Gebruiksaanwijzing (incl. afmetingen)
mini CORI-FLOW Ex d - Manual
Certificates
ATEX: DEKRA 12ATEX0114X
IECEx: IECEx DEK 12.0040
TIIS Zone 1 / JP Ex: DEK 19.0041