Bronkhorst

MAG-VIEW MVM-250-QA

Low-Flow Magnetic Inductive Flow meters for water-like liquids

  • Compact, weatherproof (IP65) design
  • No moving parts (no mechanical wear)
  • Interference free operation
  • Independence to inlet/outlet pipework
  • Fast response
  • Free pipe cross section: low ΔP, insensitive to contamination
  • Cost-optimized (plastic) model
MASSFLOW-ONLINE product
  Vraag offerte aan Downloads Koop nu Ondersteuning
MAG-VIEWMVM-250-QA

Electromagnetic flow meters for low flow rates of water and aqueous solutions

MAG-VIEW instruments are electromagnetic inductive flow meters for electrically conductive liquids with a minimum conductivity of 20 μS/cm. The compact, weatherproof (IP65) flow meters do not contain any moving parts, cause virtually no pressure loss and can be mounted in any position, requiring no straight inlet or outlet runs.

MAG-VIEW flow meter model MVM-250-QA is a cost-efficient instrument with a DN25 PVDF measuring tube for flow rates of 12,5…250 l/min, suited for operating pressures up to 10 bar(g). The analog and pulse output signals of the instrument are proportional to the flow.


Technische specificaties

Meet- / regelsysteem
Flow12,5 … 250 l/min
(max. flow 300 l/min)
Nauwkeurigheid volumeflowmeting± 1 % RD
(incl. fabriekskalibratiecertificaat; testcondities: water 23°C)
Herhaalbaarheid1 % FS
Turndown ratio1:20 (5…100%)
Signaaluitgang vanaf~ 5 l/min
MediaWater and other conductive liquids
(minimum conductivity of 20 μS/cm)
Responstijd (sensor)< 100 msec
BedrijfstemperatuurMedium -10…60°C,
Ambient 5…60°C, not freezing
MontageAny position, attitude insensitive
Flow indicatieblinking green LED
Mechanische delen
Materiaal (onderdelen die in contact komen met het medium)Electrodes and grounding rings: Stainless Steel 316L
Measuring pipe: PVDF
Process connections: PVDF
BehuizingABS
DiameterDN25
Procesaansluitingen1 ¼" BSP male thread
AfdichtingenEPDM
Beschermingsgraad (behuizing)IP65
Nominale drukmax. 10 bar at 20°C, 8 bar at 40°C, 6 bar at 60°C
Elektrische eigenschappen
Stroomvoorziening12 … 24 Vdc ±10 %
Max. stroomverbruik3,6 W
Analoog signaal4 … 20 mA
Frequentie uitgangPulse rate / K-factor : 80 pulses/l
Resolution : 12,5 ml/pulse
Signal shape : Push-Pull
Signal current : max. 25 mA
Elektrische beveiligingsmaatregelenShort-circuit proof,
protected against polarity reversal
Elektrische aansluiting4-pin-plug M12x1
Elektrische aansluiting
Control valve options
Externe actuatoropties die op de controller moeten worden aangesloten
Ex-proof specificaties
Goedkeuringen / certificaten

Technische specificaties kunnen zonder kennisgeving worden gewijzigd.

Voor technische maattekeningen en aansluitschema's bezoekt u de productpagina op onze website

Downloads

Brochures
MAG-VIEW Brochure


Bronkhorst NEDERLAND

Lunet 10c
3905 NW Veenendaal
Tel. +31 (0)318 55 12 80
[email protected]

Copyright © 2020 Bronkhorst. All rights reserved.     Sitemap     Disclaimer     Privacy note