Bronkhorst

IN-LINE filter
Series M-423 RS

High Flow

  • Filters for Mass Flow Meters / Controllers
  • For increasing the MTBF (Mean Time Between Failure)
  • Contains a 316L sintered metal filter cartridge
  • Housing: AISI 316
  • O-rings: Viton; optional EPDM and FFKM (Kalrez)
Get a quote Request a demo Support
IN-LINE filter<br />Series M-423 RS
IN-LINE filter<br />Series M-423 RS
IN-LINE filter<br />Series M-423 RS

Description

Inherent to its construction, a thermal mass flow meter or controller for gases is sensitive to contamination. To increase the MTBF (Mean Time Between Failure) it is important to make sure that the gas entering the instrument is clean. The IN-LINE Filter Assembly, screwed into the inlet of the instrument, provides this service. It contains a 316L sintered metal filter cartridge that is suitable for general purpose filtration and can be cleaned with a suitable solvent. If the gas contains a large particulate content, we advise the use of a pre-filter.

 

Selection

This High Flow filter has a ½” female thread at the inlet and a ½” male tread on the outlet. The M-423 series has a porosity (µm) of 2, 5, 10, 20 or 40 μm, depending on the model. The pressure rating for this model is 200 bar. The ΔP across the IN-LINE filter can be calculated with the help of our online calculation tool FLUIDAT on the Net.


 

Technical specifications

Available models
Model no. Average porosity (µm) Connections in Connections out Pressure rating
M-423-16 2 1/2" female 1/2" male 200 bar
M-423-17 5 1/2" female 1/2" male 200 bar
M-423-19 10 1/2" female 1/2" male 200 bar
M-423-21 20 1/2" female 1/2" male 200 bar
M-423-33 40 1/2" female 1/2" male 200 bar




Bronkhorst High-Tech B.V.

Nijverheidsstraat 1A
NL-7261 AK Ruurlo (NL)
Tel. +31 573 45 88 00
info@bronkhorst.com

Copyright © 2018 Bronkhorst. All rights reserved.     Sitemap     Disclaimer     Privacy note