Bronkhorst

ES-FLOW™ ES-113I

Low-Flow Ultrasonic Flow Meter for liquids

  • Fast and accurate measuring signal
  • Low pressure loss due to straight sensor tube
  • Medium independent and temperature insensitive
  • Local display with capacitive touchscreen
  • IP67 rating
  • Pressure rating 100 bar

 

Get a quote Request a demo Support
ES-FLOW™ES-113I

Low-Flow Ultrasonic Flow Meters for Liquids

ES-FLOW™ model ES-113I Liquid Flow Meters (LFMs) are suited for precise measurement of volume flow ranges between 4 and 1500 ml/min. The LFM consists of a innovative ultrasonic flow sensor and an IP67 protected measuring head with bright LCD display and capacitive touchscreen for adjustment of the settings e.g. for flow indication, alarm, totalisation and control (if applicable). The electronics include a PID controller for optional flow control by means of a separately mounted control valve or pump. ES-FLOW™ model ES-113I has orbitally welded compression type connections, making this instrument suitable for operating pressures up to 100 bar.

Bronkhorst® ES-FLOW™ series are equipped with a digital pc-board, offering high accuracy, excellent temperature stability and fast response. The main digital pc-board contains all of the general functions needed for measurement and control. In addition to the standard RS232 output the instruments also offer analog I/O. As an option, an on-board interface can be mounted to provide DeviceNet™, PROFIBUS DP, Modbus or FLOW-BUS protocols.


Technical specifications

Flow ranges
Minimum full scale 200 ml/min
Maximum full scale 1500 ml/min
Minimum flow 4 ml/min
Measuring span analog: 1:50 (2...100%);
digital 4:200 up to 4:1500 ml/min;
full scale value scalable by the user
Performance
Volume flow accuracy ±1% Rd ± 1 ml/min
Repeatability ≤ 0.1% Rd ± 0.05 ml/min
Warm-up time approx. 1/2 hour after power up for optimum performance
Fluid temperature accuracy ±1 °C
Mounting Any position, attitude insensitive
Ambient temperature 10…60°C
Response time, meter (t98%) ≤200 msec
Refresh (cycle) time ≤10 msec
Mechanical parts
Material (wetted parts) Stainless steel 316L
Surface quality (wetted parts) Ra < 0,8 μm
Sensor Straight tube
Process connections (welded) 3 mm, 6 mm, 1/8”, 1/4” OD compression typen or 1/4” face seal male
Seals (internal) None
Weight Meter: 1,3 kg;
Controller: on request
Ingress protection (housing) IP67
Pressure rating 100 bara at TAMB = 15...35°C, |TAMB - TMED| ≤ 25°C; for elevated temperatures please consult factory
Electrical properties
Power supply +15…24 Vdc ±10% Max. ripple recommended: 50 mV tt
Power consumption Max. 2.8 W
Analog output 0…5 (10) Vdc, min. load impedance > 2 kΩ; 0 (4)…20 mA (sourcing), max. load impedance < 375 Ω
Analog setpoint 0…5 (10) Vdc, min. load impedance > 100 kΩ; 0 (4)…20 mA, load impedance ~250 Ω
Analog control signal output 0...10 Vdc or 4...20 mA (Pin 5 option)
Pulse output Available (Pin 5 option)
Digital communication Standard RS232; Options: PROFIBUS DP, DeviceNet, Modbus RTU/ASCII, FLOW-BUS
Electrical connections
Analog/RS232 M12 connector (male)
PROFIBUS DP bus: M12 connector (female); power: M12 connector (male)
DeviceNet 5-pin M12 connector (male)
Modbus (RTU/ASCII)/FLOW-BUS M12 connector (male)

For dimensional drawings and hook-up diagrams please visit the productpage on our website

Downloads

Brochures
ES-FLOW brochure
ES-FLOW model key

Manuals
Manual ES-FLOW

Hook-up diagrams
Analog IO - RS232
DeviceNet
FLOW-BUS
Modbus
PROFIBUS-DP
Optional Bus and IO-Configurations

Dimensional drawing
Dimensional drawing ES-103I-ES-113I


Bronkhorst High-Tech B.V.

Nijverheidsstraat 1A
NL-7261 AK Ruurlo (NL)
Tel. +31 573 45 88 00
info@bronkhorst.com

Copyright © 2018 Bronkhorst. All rights reserved.     Sitemap     Disclaimer     Privacy note