Bronkhorst

ES-FLOW ES-113C

液體用低流量超音波流量計

  • 快速準確的測量信號
  • 傳感器管直,壓力損失小
  • 介質獨立和溫度不敏感
  • 緊湊、堅固的外殼,IP66/IP67 防護等級
  • 額定壓力 100 bar
詢價 下載 數據表
ES-FLOWES-113C
ES-FLOWES-113C

Low-Flow Ultrasonic Flow Meters for Liquids

The innovative ES-FLOW Ultrasonic Liquid Flow Meter/Controller is designed for measuring volume flow ranges between 2 and 1500 ml/min with high precision, high linearity and low pressure drop using Ultrasonic Wave Technology in a small bore tube. Liquids can be measured independent of fluid density, temperature and viscosity, therefore recalibration per fluid is unnecessary. The flow meter has a straight sensor tube design with the actuators positioned at the outer surface. Therefore, the instrument is easy to clean. All wetted parts are made of stainless steel, build in an aluminium housing. The on-board PID controller can be used to drive a control valve or pump, enabling users to establish a complete, compact control loop.

Bronkhorst® ES-FLOW series are equipped with a digital pc-board, offering high accuracy, excellent temperature stability and fast response. The main digital pc-board contains all of the general functions needed for measurement and control. In addition to the standard RS232 output the instruments also offer analog I/O. As an option, an on-board interface can be mounted to provide CANopen®, DeviceNet™, EtherCAT®, PROFIBUS DP, PROFINET, Modbus RTU, ASCII or TCP/IP, EtherNet/IP, POWERLINK or FLOW-BUS protocols.


Technical specifications

Measurement / control system
Maximum full scale flow1500 ml/min
Minimum flow2 ml/min
Volume flow accuracy≤ ±0,8% Rd
Repeatability≤ 0,1% Rd ± 0,05 ml/min
Turndown ratiodigital 1:750
(full scale value scalable by the user);
analog: 1:50 (2...100%), also applicable for controller
Zero stability (ZS)≤ 0,4 ml/min
FluidsSpeed of sound between 1000 and 2000 m/s;
fluid independent measurement; also suitable for non-conductive fluids
Response time (sensor)≤ 50 msec (t98%)
Refresh (cycle) time≤ 10 msec
Fluid temperature-10...60 °C
Ambient temperature0...60 °C
Mountingany position, attitude sensitivity negligible
Temperature accuracy±1 °C
Mechanical parts
Sensorstraight 1/16" tube, 1,3 mm ID
Material (wetted parts)stainless steel 316L (1.4404)
Housingaluminium
Pressure rating (PN)100 bar g
Process connections3 mm, 6 mm, 1/8”, 1/4” OD compression type;
other on request
Sealsmetal
Ingress protectionIP66 and IP67
Electrical properties
Power supply+15…24 Vdc ±10%
Max. power consumption2,8 W
Analog output0…5 (10) Vdc; 0 (4)…20 mA (sourcing)
Analog setpoint0…5 (10) Vdc, impedance > 100 kΩ;
0 (4)…20 mA, impedance ~250 Ω
Customised I/OAnalog control signal output (option): 0...10 Vdc or 4...20 mA
Pulse output (option)
Digital communicationStandard: RS232;
Options: PROFIBUS DP, DeviceNet™, EtherCAT®, Modbus RTU/ASCII, CANopen®, FLOW-BUS, PROFINET, Modbus/TCP, EtherNet/IP, POWERLINK
Electrical connection
Analog/RS232M12 8-pin connector male
Actuator/Remote displayM8 4-pin connector male
PROFIBUS DPM12 5-pin connector male
CANopen® / DeviceNet™M12 5-pin connector male
FLOW-BUS/Modbus-RTU/ASCIIM12 5-pin connector male
Modbus TCP / EtherNet/IP / POWERLINK2 x 4-pin M12 connector female (in/out)
EtherCAT®/ PROFINET2 x 4-pin M12 connector female (in/out)
Control valve options
External actuator options to be connected to the controller
Certification for hazardous areas
Approvals / certificates

Technical specifications subject to change without notice.

For dimensional drawings and hook-up diagrams please visit the product page on our website

Downloads

Brochures
Datasheet ES-FLOW ES-1xxC
Manuals
Manual ES-FLOW C-version
Quick Start Guide ES-FLOW C-version
Hook-up diagrams
Analog IO - RS232
DeviceNet
FLOW-BUS
Modbus
PROFIBUS-DP
Industrial EtherNet (EtherCAT, EtherNet-IP, Modbus-TCP, Powerlink, Profinet)
CANopen
Optional Bus and IO-Configurations
Dimensional drawing
Dimensional drawing ES-113C
Solids 3D
ES-113C-qtr-inch-OD


台灣柏朗豪斯特股份有限公司

新竹縣竹北市台元街三十八號四樓之一、二
Rm. 1 & 2, 4F., No.38, Taiyuan St., Zhubei City, Hsinchu County 302, Taiwan (R.O.C.)
電話 +886 3-5600-518
[email protected]

            Social Responsibility
Copyright © 2024 Bronkhorst. All rights reserved.     Sitemap     Disclaimer     Privacy note