We offer the widest product range of low-flow mass flow meters on the market. Numerous styles of both standard and bespoke instruments can be offered for applications in laboratory, machinery, industry and hazardous areas.
Customer satisfaction, innovation and quality of product and service have been the cornerstones of Bronkhorst's success. Based on our experience, innovation and sense of responsibility, a relationship with Bronkhorst assures Performance for Life.
Bronkhorst instruments are used for numerous applications in many different markets. In this section you will find an overview of the main markets for our equipment, illustrated with some typical examples of applications.
Are you looking for technical documentation, are you interested to learn more about the measuring principles of Bronkhorst products, or you do want to get in contact with a Bronkhorst Service Engineer? This section will guide you to the relevant service & support topics.
Bronkhorst High-Tech BV the leaders in Mass Flow Meter / Mass Flow Controller technology for gases and liquids, Pressure Controllers and Evaporation Systems.
Finding new energy sources is a hot topic in today’s society. In Switzerland, I love the scenery we have with beautiful mountains everywhere you look. Wouldn’t it be great if we could use these mountains in a way they can help us creating our own clean energy?
In fact, the Swiss Grimsel Rock Laboratory (owned by NAGRA, ETH Zürich) investigates the possibilities to use the earth’s heat as a energy source, Geothermal energy.
Read our customer story about reducing earthquakes when exploiting geothermal energy. At the Grimsel Rock Laboratory, ETH Zürich investigates under which conditions such induced earthquakes occur and how the magnitude of such earthquakes can be reduced to be not felt at the earth surface. Our mass flow controllers are used in their experiments to simulate the geothermal energy generation process by controlled supply of water flows into the subterranean rocks.
Electricity production in Switzerland today can be divided in 3 main sources:
About 30% of the electricity production comes from nuclear power plants. How nice would it be to reduce this even more into a more clean energy?
Geothermal energy seems to be a good replacement for a part of the currently used nuclear energy here. The idea itself is quite simple: pump cold water into the earth’s crust, allow it to be heated by earth heat, and pump up the hot water to exploit its heat, for example in a power plant.
However, there is catch. At a depth of 4 to 5 kilometres, when the injected water is heated up to 200 °C, it will expand inside the porous rocks. The permeability of the rock is low and need to be enhanced through high pressure fluid injections. This pressure increase can cause induced seismic events.
At the Grimsel Rock Laboratory it is investigated under which conditions such induced earthquakes occur and how the magnitude of such earthquakes can be reduced to be not felt at the earth surface.
Bronkhorst mass flow controllers are used in their experiments to simulate the geothermal energy generation process by controlled supply of water flows into the subterranean rocks. Mass flow controllers are required to accurately inject the desired amounts of water into the rocks, at the right pressure.
To investigate which water flow rate will induce a certain activity inside the rocks, the devices should be able to cover a large range of water flow rates.
The Bronkhorst solution consists of three different Coriolis mass flow controllers mounted on a flow board, including control and monitoring equipment. The mass flow controllers (MFC’s) were used to control pure water.
With the used flow board, each of the three devices can be selected for the appropriate flow rate. Coriolis instruments are used here because of their high accuracy, and because they are able to directly supply a certain mass of water regardless of process conditions, such as ambient temperature and pressure.
Furthermore, water properties such as its temperature and density can be read in real-time. The maximum temperature of the water used at the Grimsel Rock Laboratory, which is located at a depth of 400 to 500 meters, is 40°C (only during the thermal tests).
Would you like more information about the experiments geothermal energy? Download the PDF from ETH Zurich researchers.
This setup is a robust, reliable, flexible, compact and easy-to-use way to control the water supply. To track their experiments, the researchers from ETH Zürich use Bronkhorst software, including FlowPlot to make a plot of the entire experiment.
Furthermore, they have the possibility using TeamViewer to control, view and monitor the setup at Grimsel from a remote location, so they do not have to be at the test site the entire period of time.
Do you know how to select the right flow meter? Selecting the right flow meter is the key to success. Read our blog how you can more easily select a flow meter for your application.
When you install a mass flow meter or controller it is important that you get the best performance from the moment you install and turn it on. Check out our top 10 tips for installation of thermal mass flow meters and controllers.