We offer the widest product range of low-flow mass flow meters on the market. Numerous styles of both standard and bespoke instruments can be offered for applications in laboratory, machinery, industry and hazardous areas.
Customer satisfaction, innovation and quality of product and service have been the cornerstones of Bronkhorst's success. Based on our experience, innovation and sense of responsibility, a relationship with Bronkhorst assures Performance for Life.
Bronkhorst instruments are used for numerous applications in many different markets. In this section you will find an overview of the main markets for our equipment, illustrated with some typical examples of applications.
Are you looking for technical documentation, are you interested to learn more about the measuring principles of Bronkhorst products, or you do want to get in contact with a Bronkhorst Service Engineer? This section will guide you to the relevant service & support topics.
Bronkhorst High-Tech BV the leaders in Mass Flow Meter / Mass Flow Controller technology for gases and liquids, Pressure Controllers and Evaporation Systems.
In Research and Development laboratories of (petro-) chemical companies as well as pharmaceutical companies or life science companies, chemical reactors are used for many different processes.
Bronkhorst has developed a specialised combination of electronic pressure and thermal mass flow controllers for automated pressure control of reactor vessels. This standard solution can be applied for low flow lab reactor systems as well as for high flow industrial applications as for instance in hydrogenation processes in the food and pharma industry or at chemical plants, at either low or (very) high pressure (up to 400 bar).
To optimize a chemical reaction, chemists must find the best combination of compounds and insert these in the optimal proportions into the reaction chamber. This reactor may be kept at a certain pressure and temperature and a catalyst may be added to accellerate the reaction.
The input of the reaction gases must be accurately measured at all times, also while pressurizing the reactor. An overshoot in flow (outside the scale of the mass flow meter) should be avoided, because this will introduce inaccuracy.
Combined Mass Flow - Pressure Control for safe and automated reactor pressure control.
The proposed set-up may slightly vary per application, since the concept can be applied to both analog or digital systems. Furthermore the instruments used may be in ‘laboratory style’ or with rugged industrial housing, IP65 protected and optionally with ATEX Zone 2 approval. To illustrate the solution, uniquely offered by Bronkhorst, please see the adjacent schematic.
At the inlet of the reactor, a mass flow controller (MFC) takes care of the process gas delivery, whilst an electronic pressure transmitter (EPT) measures the reactor pressure. At the outlet of the system there is a flow restriction which could simply be a (needle) valve or, as shown in the illustration, a mass flow regulator (MFR) with local display. The reactor pressure is controlled by giving a setpoint to the pressure transmitter. In the illustration this is done via RS232 by a script programmed into a PC. The integrated PID-controller of this pressure meter (Master) controls the valve position of the mass flow controller's control valve (Slave). When building up the pressure in the reactor, the maximum inlet flow is restricted by the mass flow controller, thus preventing a flow peak. By using the ‘slave factor’ option, the maximum flow can be adjusted.