Bronkhorst

IN-LINE Filter

High Flow Serie M-413

大流量

  • マスフローメータ・コントローラ用インラインフィルタ
  • 平均故障間隔MTBF(Mean Time Between Failure)向上
  • ステンレス316L製焼結金属カートリッジ
  • ステンレスAISI 316製ハウジング
  • O-rings: Viton; オプションでEPDM, FFKM(Kalrez)
お見積り依頼 Downloads Support
IN-LINE Filter<br /><H2>High Flow Serie M-413</H2>

Description

Inherent to its construction, a thermal mass flow meter or controller for gases is sensitive to contamination. To increase the MTBF (Mean Time Between Failure) it is important to make sure that the gas entering the instrument is clean. The IN-LINE Filter Assembly, screwed into the inlet of the instrument, provides this service. It contains a 316L sintered metal filter cartridge that is suitable for general purpose filtration and can be cleaned with a suitable solvent. If the gas contains a large particulate content, we advise the use of a pre-filter.

 

Selection

This High Flow filter has a ½” female thread at the inlet and a ½” male tread on the outlet. The M-413 series has a porosity (µm) of 2, 5, 10, 20 or 40 μm, depending on the model. The pressure rating for this model is 100 bar. The ΔP across the IN-LINE filter can be calculated with the help of our online calculation tool FLUIDAT on the Net.


 

Technical specifications

Available models
Model no. Average porosity (µm) Connections in Connections out Pressure rating
M-413-16 2 1/2" female 1/2" male 200 bar
M-413-17 5 1/2" female 1/2" male 200 bar
M-413-19 10 1/2" female 1/2" male 200 bar
M-413-21 20 1/2" female 1/2" male 200 bar
M-413-22 40 1/2" female 1/2" male 200 bar


Downloads

Brochures
Filters brochure
Dimensional drawings
Dimensional Drawing M-413 / M-423
Dimensional drawings
For dimensional drawings and hook-up diagrams please visit the product page on our website



ブロンコスト・ジャパン株式会社
〒135-0016
東京都江東区東陽5-27-5

Tel.  03-3645-1371

sales◎bronkhorst.jp   ◎を@に置き換えて下さい

     
Copyright © 2024 Bronkhorst. All rights reserved.     サイトマップ     免責事項     プライバシーポリシー