기타 응용

정밀함을 최선의 가치로 여기며, 당사는 35년 이상 실험실, 기계 제작 및 다른 많은 산업 분야에서 전문가로 인정받아 왔습니다. 브롱호스트는 유럽 시장의 선두주자이며, 글로벌 5대 기업 중 하나입니다.

응용 예시

  • 안전 테스트를 위한 가스 혼합
  • NASA 우주복을 포함한 보호복의 시험
  • 전동식 장비의 연료 소비량 측정
  • 단열판 제작
  • 폐수 처리 시설에서의 통기
  • 다양한 시장의 누출 또는 투과성 테스트


Flow control for temperature imaging process

Bronkhorst provided a vapour solution consisting of an evaporator module (VDM) and a liquid feed module for precise gas and liquid control and temperature control for a temperature imaging process.

View application note
Flow control for temperature imaging
Industrial boot manufacturing

Improved release agent spraying in industrial boot manufacturing

A Bronkhorst Coriolis mass flow meter solution was used to dose a specific amount of release agent by a boot manufacturer to improve their process.

View application note

CO2 supply for pH control in drinking water

Bronkhorst USA supplied a flow solution to accurately measure CO2 flows for pH control for re-mineralisation in a desalination plant. 

View application note
Drinking water re-mineralisation
Automotive industry

Kv value testing for injector valves

For an application in the automotive industry Bronkhorst supplied ultrasonic- and thermal flow meters to test the performance of injector valves for petrol engines.

View application note

Flow control in valve testing for coffee machines

An essential part of modern coffee machines is the control valve that supplies hot water to the coffee powder. These control valves are tested during the manufacturing process. For this mass flow controllers have been used.

View application note
Coffee machine
Aeration application for fish farming

Aeration in fish farming

Fish farms use aeration or oxygenation to provide ideal conditions for the fish. By supplying oxygen to the water, water circulation is improved which helps prevent gill diseases. Read the solution our distributor Flow-Teknikk supplied for a Norwegian customer.

View application note

Calibration setup for mass flow devices

A mobile calibration setup can be a good solution for companies that have to carry out many projects under time pressure and want to do their own calibration of the flow devices.

View application note
Possible calibration setup

Monitoring indoor air quality

Good indoor air quality is important for our health. To keep the indoor air clean, you have to take care of adequate ventilation without unnecessary pollutants. This can be done with analysers.

View application note

Controlled supply of oxygen for iron removal in drinking water production

Raw water that naturally occurs in aquifers in the earth's crust contains dissolved iron in the ferrous Fe2+ form. In waterworks this iron will be removed.

View application note

Lubricant dosing in airplane manufacturing

An important part of an aircraft is the fuselage, the part that surrounds crew, passengers and cargo. Fuselage parts are connected by making use of rivets, and to that purpose holes need to be drilled in these parts.

View application note

Gas supply control in stationary natural gas engines

In stationary natural gas engines, natural gas is being combusted with air to exploit the combustion energy. In this application the influence of hydrogen and exhaust gas recirculation on this type of engine are investigated.

View application note
Gas engines
Car dashboard

Accurate dosing of release agent

A customer in the automotive industry uses our mass flow controllers combined with a valve for an accurate dosing solution. In this case for dosing release agent into moulds.

View application note

Simulation of exhaust gas to test lambda probe

Each modern car with a combustion engine has a self-controlling way to optimise the engine performance. A sensor positioned in the exhaust section of the car measures the oxygen content of the car exhaust gases.

View application note
Lambda probe

Safety test for gas couplings

A coupling manufacturer employs a test setup for a specific type of gas couplings that are used for the United States market. These gas couplings need to be gas tight during a certain minimum period of time in the occasion of fire.

View application note


Bronkhorst offers digital MASS-STREAM D-6300 mass flow meters and integrated flow controllers for gases with flow rates from 0,2 up to 10000 ln/min Air equivalent.

View application note
Flow control for leakage test of air ducts

Flow Control for leakage test

An application showing a leakage test method using a pressure controller and thermal mass flow meter working as a device under test (DUT) principle to guarantee leak tightness and temperature stabilitsation.

View application note

Industrial gas ammonia

The digital MASS-STREAM D-6300 series mass flow meters and controllers of Bronkhorst provide the most feasible solution for industrial gases like Ammonia (NH3) with demanding characteristics.

View application note

Explosive Mixture Composition

Accuracy, reliability and safety are requirements for instrumentation used in test equipment for ATEX environments, when gas mixtures of precise composition are necessary.

View application note

Gas Consumption

Up to 50% of Bronkhorst's MASS-STREAM meters and controllers are sold with our multi-functional display which offers a totalizer function for consumption measurement of gases and many other features.

View application note

Valve seat testing in the automotive industry

Valve manufacturers check any metal to metal valve seats using pressure degradation methods. Manufacturers are in need of new methods for leak testing to keep up with customer needs.

View application note

CEM Systems for NASA Research

The National Aeronautics and Space Administration (NASA) recently redesigned the system used to test the new space suit Portable Life Support System (PLSS) that is under development. In order to test the PLSS a simulated human metabolic load must be applied to the various sub-systems and so NASA needed to simulate the human production of CO2 and water vapor with its associated heat load.

View application note

기타 시장

브롱호스트 제품은 다양한 시장에서 다양한 용도로 사용됩니다. 실험실, 대학, 산업, 생산 및 파일럿, 심지어는 폭발의 위험이 있는 지역이나 설비에서도 볼 수 있습니다. 생산된 제품의 상당량은 OEM 고객의 제조 기계 또는 장비에 설치되어 있습니다. 


경기도 화성시 동탄순환대로 830 SK
V1 Center 209호
대표자 : 헨드리크제지너스타펠
사업자등록번호 : 119-86-74469

           Social Responsibility
Copyright © 2024 Bronkhorst. All rights reserved.     Sitemap     Disclaimer     Privacy note