We offer the widest product range of low-flow (mass) flow meters and controllers on the market. Numerous styles of both standard and bespoke instruments can be offered for applications in laboratory, machinery, industry and hazardous areas.
Customer satisfaction, innovation and quality of product and service have been the cornerstones of Bronkhorst's success. Based on our experience, innovation and sense of responsibility, a relationship with Bronkhorst assures Performance for Life.
Bronkhorst instruments are used for numerous applications in many different markets. In this section you will find an overview of the main markets for our equipment, illustrated with some typical examples of applications.
Are you looking for technical documentation, are you interested to learn more about the measuring principles of Bronkhorst products, or you do want to get in contact with a Bronkhorst Service Engineer? This section will guide you to the relevant service & support topics.
Bronkhorst High-Tech BV the leaders in Mass Flow Meter / Mass Flow Controller technology for gases and liquids, Pressure Controllers and Evaporation Systems.
Tempress manufactures production equipment for
the semiconductor and the solar markets. Both
markets rely on semiconducting materials.
However, the manufacturing conditions for
integrated circuits (computer chips) and solar
panels are somewhat different, as the influence of
dust particles is less detrimental to solar cells than
Tempress is mainly involved in diffusion doping and
anti-reflection coating technology. In the diffusion
doping step, by means of chemical vapour deposition,
silicon is doped with boron and phosphor in order to
improve the electrical conductivity properties of
silicon. Bronkhorst realised a subsystem to the
Tempress diffusion doping machine, generating boron
and phosphor containing (oxy)halide precursor
vapour flows, making use of a bubbler to convert the
liquid precursors into vapour, to supply to the silicon
wafers inside the reactor of the Tempress machine.
The main aim is to realise a subsystem to accurately dose boron and phosphor precursors to the silicon wafers. This subsystem needs to be compact in order to reduce the size of the machine, and needs to be ‘plug & play’ for convenience. In addition to these ‘hard’ requirements, a ‘soft’ requirement is that only one contact point - who speaks Tempress’ language - should take responsibility for the entire subsystem development.
The vapour generating subsystem delivered by Bronkhorst, has the size of an average desktop computer housing. Three of these new compact subsystems occupy the same volume as one conventional vapour/gas dosing system. This subsystem is controlled by the main PLC of the Tempress machine. This main PLC also controls the recipe, i.e. the amount of precursors to be supplied.
The liquid-to-vapour converting bubbler technology is based on Bronkhorst's CEM (Controlled Evaporation and Mixing) technology. Some years ago, Bronkhorst realised an evaporator Solution based on their CEM technology. This CEM supplied water vapour to the reactor, resulting in a higher efficiency of the solar panels. An improvement of the bubbler in comparison to the CEM is the container which is made of glass with a protective polymer coating, and which is chemically resistant to the used precursors. This container is in fact a cartridge that can be exchanged by the user of the Tempress equipment when it's empty. With respect to the approach to realise this Solution, first an alpha unit was developed to demonstrate the proof of principle. This unit was tested at a major Dutch research institute, and the test results served as input for further development leading to beta units, which already resembled 80-90% of the production units. And of these production units - fine-tuned beta units - the first orders are now being processed. Bronkhorst took responsibility in delivering the 'plug & play subsystem' fully tested, which means that Tempress could concentrate on their own core business. This Solution has been exclusively developed for Tempress. As Bronkhorst makes customer-specific solutions, the confidentiality is guaranteed. Only authorized people have access to relevant documentation. As Tempress is a front-runner in the solar market, spending a lot of effort in R&D, they would like to keep their technological advantage.
NL-7261 AK Ruurlo (NL)
Tel. +31 573 458800