Bronkhorst

VDM Evaporator SW-100

Vapour Delivery Module

  • Accurately controlled gas/liquid mixture
  • Pre-tested, safe and ready to use
  • High reproducibility
  • Very stable vapour flow
Get a quote Request a demo Support
VDM EvaporatorSW-100

All-In-One Vapour Delivery Module

Bronkhorst® model SW-100 VDM All-In-One Vapour Delivery Modules are suited for precise vapour flow delivery, composed by mixing up to 30 g/h H2O (32 g/h IPA) with max. 4 ln/min of carrier gas at operating pressures between vacuum and 10 bar. The VDM incorporates the components of a Bronkhorst® CEM-System and more! Besides gas and liquid flow controllers and the temperature controlled evaporator, the module features integrated power supply with display (1,8"TFT) and control functions. As an option, the unit offers local or remote trace heating temperature control.


Technical specifications

Performance
Ambient temperature 5...40°C
Max. heating temperature 200°C
Heater capacity 10 W
Mechanical /Electrical specifications
Material (wetted parts) stainless steel 316L or comparable
Pressure rating 10 bar(g)
Process connections Gas and liquid inlet: compression type or face seal couplings;
Vapour outlet: 1/4" tube (other options on request)
Purge outlet 1/8" OD compression type or 1/8" face seal male
Seals Viton®/Kalrez®; other on request
Plungers Kalrez®
Display 1,8" (TFT technology)
Mains supply inlet IEC 60320-1/C20 male socket with on/off switch, 230 V / 115 V; 50 Hz / 60 Hz
Power consumption

max. 250 VA;
add 300 VA for optional tracing control

Electrical connection FLOW-BUS (2 x RJ45 connector) or RS232 (1 x 9-pin sub-D connector);
Optional: Pt100-connection (1 x 4-pin M12 male, a-coded);
Optional: IEC 60320-2-2/C13 female tracing outlet

Note: For gas and liquid flow control the VDM module is equipped with Bronkhorst Thermal or Coriolis Mass Flow Meters/Controllers

Technical specifications subject to change without notice.


Downloads

Brochures
VDM brochure

Manuals
Manual Vapor Delivery Module

Dimensional drawing
Dimensional Drawing SW100-SW200


Bronkhorst High-Tech B.V.

Nijverheidsstraat 1A
NL-7261 AK Ruurlo (NL)
Tel. +31 573 45 88 00
info@bronkhorst.com

Copyright © 2018 Bronkhorst. All rights reserved.     Sitemap     Disclaimer     Privacy note