We offer the widest product range of low-flow (mass) flow meters and controllers on the market. Numerous styles of both standard and bespoke instruments can be offered for applications in laboratory, machinery, industry and hazardous areas.
Customer satisfaction, innovation and quality of product and service have been the cornerstones of Bronkhorst's success. Based on our experience, innovation and sense of responsibility, a relationship with Bronkhorst assures Performance for Life.
Bronkhorst instruments are used for numerous applications in many different markets. In this section you will find an overview of the main markets for our equipment, illustrated with some typical examples of applications.
Are you looking for technical documentation, are you interested to learn more about the measuring principles of Bronkhorst products, or you do want to get in contact with a Bronkhorst Service Engineer? This section will guide you to the relevant service & support topics.
Bronkhorst High-Tech BV the leaders in Mass Flow Meter / Mass Flow Controller technology for gases and liquids, Pressure Controllers and Evaporation Systems.
Thermal mass flow instruments that make use of a bypass (capillary bypass or bypass sensor) are what most people have in mind when they think of thermal mass flow instruments. What are the differences?
In instruments based on the thermal principle, power is applied to heat the sensor tube. Accordingly, the temperature of the tube is measured at two points. With no flow measured, the temperature differential between the two points will be zero. When the flow increases, the temperature at the first measuring point will decrease, as fluid carries away the heat. At the same time the temperature at the second measuring point will increase as the fluid carries heat to it. More flow will result in a greater temperature differential and this temperature differential is proportional to the mass flow.
Another technology used to measure mass flow is CTA (Constant Temperature Anemometry). In a CTA (through flow, straight tube) instrument there are two measurement 'probes' inserted into a straight tube flow path. The first 'probe' both heats and measures the temperature of the fluid, as the second 'probe' measures the temperature of the fluid.
Again, as the gas flow increases the gas will carry heat from the first measuring point to the second one. In a CTA, however, the power is varied to keep the temperature between the two measuring points constant, and it is this power level that is proportional to the mass flow.
Each technology has its advantages and disadvantages which generally are application specific:
A clean, dry gas application where higher accuracy is as important as repeatability, may be a better application for a bypass instrument like the Bronkhorst EL-FLOW series.
An application with a dirty or slightly moist gas, or where lower accuracy but high repeatability and robustness is required, may be a better application for a CTA instrument like the Bronkhorst MASS-STREAM series.
Stay up to date with the latest developments in high tech with our newsletter.