We offer the widest product range of low-flow (mass) flow meters and controllers on the market. Numerous styles of both standard and bespoke instruments can be offered for applications in laboratory, machinery, industry and hazardous areas.
Customer satisfaction, innovation and quality of product and service have been the cornerstones of Bronkhorst's success. Based on our experience, innovation and sense of responsibility, a relationship with Bronkhorst assures Performance for Life.
Bronkhorst instruments are used for numerous applications in many different markets. In this section you will find an overview of the main markets for our equipment, illustrated with some typical examples of applications.
Are you looking for technical documentation, are you interested to learn more about the measuring principles of Bronkhorst products, or you do want to get in contact with a Bronkhorst Service Engineer? This section will guide you to the relevant service & support topics.
Bronkhorst High-Tech BV the leaders in Mass Flow Meter / Mass Flow Controller technology for gases and liquids, Pressure Controllers and Evaporation Systems.
As a technique to reduce the level of Nitrogen Oxides (NOx) in boiler or furnace exhaust gases, Selective Catalytic Reduction (SCR) has been around for years. SCR is a technology which converts Nitrogen Oxides (NOx) with the aid of a catalyst into diatomic Nitrogen (N2) and Water (H2O). A reductant agent is injected into the exhaust stream through a special catalyst. A typical reductant used here is Anhydrous Ammonia (NH3).
A customer of Bronkhorst, who has been selling and servicing boilers and pumps for commercial and industrial applications for over 50 years, had been using a mass flow controller (MFC) which was not reliable and robust enough for the application and thus their customers were suffering from poor ammonia measurement and control.
Some NOx reduction systems are liquid ammonia based, and others are gas based ammonia. Whatever the state of the ammonia in the NOx reduction system Bronkhorst can offer accurate ammonia measurement and control. Systems in the field today are using the MASS-STREAM (gas), IN-FLOW (gas) and Mini CORI-FLOW (liquid) to accurately control the ammonia being injected into the exhaust gas stream so that proper reaction takes place without ammonia slip. Ammonia slip is when too much ammonia is added to the process and it is exhausted, un-reacted, from the system; effectively sending money out the exhaust stack.
There are very strict federal and state air quality regulations that specify the allowable level of NOx which can be released into the atmosphere and there can be very heavy fines if those levels are exceeded. The company needs to provide their customers with a reliable and robust solution. The application demands a robust and repeatable mass flow controller that is at home in industrial environments.
In the NOx reduction system serviced by our customer the mass flow controllers are used to control the flow of anhydrous ammonia (ammonia in gas state) into the exhaust gas of a boiler or furnace where it is adsorbed onto a catalyst. The exhaust gas reacts with the catalyst and ammonia which converts the Nitrogen Oxides into Nitrogen and Water.
Bronkhorst recommended a mass flow controller – from the MASS-STREAM series - using the CTA (Constant Temperature Anemometer) technology which is ideal to avoid clogging in potentially polluted industrial gas applications.
Let me explain a bit about the working principle of this kind of mass flow controller and why it is suitable for an application like this.
The CTA (Constant Temperature Anemometer) principle is essentially a straight tube with only two stainless steel probes (a heater and a temperature sensor) in the gas flow path. A constant temperature difference between the two probes is maintained with the power required to do so being proportional to the mass flow of the gas. This means the MASS-STREAM is less sensitive to dirt, humidity, or other contaminants in the gas, as compared to a by-pass type flow meter that relies on a perfect flow split between two paths. The thru-flow nature of the CTA technology is ideal to avoid clogging in potentially polluted industrial gas applications. The straight flow path and highly repeatable measurement and control capability, combined with the robust IP65 housing, allows the MASS-STREAM to thrive in tough applications.
Watch our video animation, explaining the functions and features of the Bronkhorst Mass Flow Meters and Controllers for gases using the CTA principle.