We offer the widest product range of low-flow (mass) flow meters and controllers on the market. Numerous styles of both standard and bespoke instruments can be offered for applications in laboratory, machinery, industry and hazardous areas.
Customer satisfaction, innovation and quality of product and service have been the cornerstones of Bronkhorst's success. Based on our experience, innovation and sense of responsibility, a relationship with Bronkhorst assures Performance for Life.
Bronkhorst instruments are used for numerous applications in many different markets. In this section you will find an overview of the main markets for our equipment, illustrated with some typical examples of applications.
Are you looking for technical documentation, are you interested to learn more about the measuring principles of Bronkhorst products, or you do want to get in contact with a Bronkhorst Service Engineer? This section will guide you to the relevant service & support topics.
Bronkhorst High-Tech BV the leaders in Mass Flow Meter / Mass Flow Controller technology for gases and liquids, Pressure Controllers and Evaporation Systems.
The Dutch office of a worldwide operating industrial boot manufacturer has multiple production lines to manufacture several types of high-performance industrial boots for applications in slaughterhouses, horse ride and many more.
In the manufacturing process, rubber compositions are used for bootleg and sole and these are injected into a mould. For this part of the production process, a thin layer of release agent is used in the mould. To dose a specific amount of release agent, the boot manufacturer requested the help of Bronkhorst using a Coriolis mass flow meter solution.
The critical step in the injection moulding process is the spot where the rubber compositions for bootleg and sole contact each other. It is important that the product, when it’s ready, can be easily removed from the mould in perfect condition to keep the amount of rejected boots as low as possible. For that purpose, it is important to use a release agent and that it is applied in a constant flow.
Prior to the implementation of the solution, the spraying process was analysed by a Bronkhorst Coriolis mass flow meter (series mini CORI-FLOW M14) in combination with the Bronkhorst FlowPlot software, to get a good understanding of the way the moulds have been sprayed. The choice for this device has been made based on the short spraying time of the release agent in the process, in accordance with the flow capacity of the M14 mass flow meter.
By adding a Coriolis flow meter in combination with a valve (acting as a flow controller) to the process, Bronkhorst was able to improve the spraying process. This combination enabled to spray a constant flow of the watery release agent.
By applying this Bronkhorst solution, the amount of release agent used in the process was controlled in a better way, resulting in the use of less of this agent and, hence, eliminating waste of release agent.
Furthermore, the number of rejected boots decreased as a result of this solution, improving the productivity of the entire boot manufacturing process. The payback time of this Bronkhorst solution is in the order of a few months.
As a sign of success of the current Bronkhorst solution, the boot manufacturer ordered a second set of devices for their production lines. Moreover, Bronkhorst was also requested to assist in analysing the boot manufacturing steps where the rubber compositions are being synthesised.