IQ+FLOW IQP-600C EPC (P2-control)

Microfluidic Forward Pressure Controller

  • Small footprint ensures space efficiency
  • Very small internal volume
  • Economical solution, low cost of ownership
  • Analog or digital communication
Get a quote Downloads Datasheet
IQ+FLOWIQP-600C EPC (P2-control)

Microfluidic Forward Pressure Controllers

Bronkhorst® model IQP-600C Forward Pressure Controllers are miniature devices which are ideal for use in cramped environments or in systems requiring minimum internal volume e.g. analytical equipment. The Pressure Controller has a chip-based (MEMS) sensor and is suited for pressure ranges between 0,025…0,5 bar and 0,5…10 bar absolute or gauge. Communication with the devices can be either in analog mode or digital over RS232 or RS485.

The ultra compact IQ+FLOW instruments are typically recommended for integration in analytical and medical equipment.

Technical specifications

Measurement / control system
Pressure rangesmin. 0,025 ... 0,5 bar
max. 0,5 ... 10 bar
Accuracy (incl. linearity and hysteresis)≤ ± 0,5 % FS
(Based on calibration at ambient temperature.)
Repeatability≤ ± 0,2 % FS
Turndown ratio1 : 20 (with flow range 1 : 50)
FluidsDry, clean, non-flammable and non-corrosive gases. Absolute pressure sensors not suitable for He.
Operating temperature5 … 50 °C
Temperature sensitivityspan: 0,1% RD/°C; zero: 0,05% FS/°C
Max. Kv-value2,37 x 10-3
Leak integrity, outboard1 x 10-6 mbar∙l/s He
Attitude sensitivitynegligible
Mechanical parts
Material (wetted parts)aluminium, Si, SiOx, epoxy;
option: stainless steel body (SS316L)
Process connectionsoptional: 10-32 UNF threaded internal nut with 1/16” ferrule (SS316 or Peek),
1/16” or 1/8” OD compression type
Sealsstandard: Viton®; other on request
Weight120 g (Aluminium) / 180 g (SS316L)
Ingress protectionIP40
Electrical properties
Readout sample time2 msec
Power supply+15 … 24 Vdc
Max. power consumption100 mA
Analog output0…5 (10) Vdc or 0 (4)…20 mA (sourcing output)
Digital communicationRS232, RS485 (Modbus-RTU/ASCII or FLOW-BUS)
Electrical connection
Power/Analog/RS232/RS485RJ45 modular jack
Control valve options
External actuator options to be connected to the controller
Ex-proof specifications
Approvals / certificates

Technical specifications subject to change without notice.

For dimensional drawings and hook-up diagrams please visit the product page on our website


IQ-FLOW Brochure
Manual IQ-FLOW
Quick installation guide
Hook-up diagrams
Analog I-O RS232
RS232-RS485 Analog I-O
Dimensional drawing
Dimensional drawing IQF-IQP 1-channel in-line
Solids 3D


1 Kings Court
Willie Snaith Road
Newmarket Suffolk CB8 7TG
Tel. +44 1223 833222
[email protected]

         Social Responsibility
Copyright © 2023 Bronkhorst. All rights reserved.     Sitemap     Disclaimer     Privacy note