FLEXI-FLOW Compact FF-Sxxx

Preconfigured Standard Mass Flow Controller

  • Swift and stable control
  • On-board gas conversion model
  • 22 unique gases embedded
  • Multi-parameter output: mass flow and temperature
  • USB-C and Bluetooth communication
  • Namur NE107 status indication
Get a quote Downloads

Preconfigured Standard (PS) Mass Flow Controllers

FLEXI-FLOW Compact Preconfigured Standard (PS) Mass Flow Controllers are suited for accurate measurement and control of flow ranges between 0…500 mln/min and 0…20 ln/min at operating pressures between 0,8 and 17 bar(a). The instrument combines a swift and stable thermal mass flow sensor based on capillary MEMS technology with a precise and proven by-pass construction. Due to the unique, internationally patented TCS Technology (Through Chip Sensor), accurate mass flow measurement, virtual independent of variations in temperature and line pressure is established. In combination with integrated temperature and up- and downstream pressure sensors, the embedded database for 22 gases allows accurate, on-board conversion. The multi-parameter instruments provide the user with useful process information. 

FLEXI-FLOW Compact Preconfigured Standard (PS) Mass Flow Controllers feature a turndown of 1:50, flow control + temperature output). They are available in 4 flow ranges (FS, based on N2):

Type FF-S500 - 500 mln/min
Type FF-S2K0 - 2 ln/min
Type FF-S5K0 - 5 ln/min
Type FF-S20K - 20 ln/min

Technical specifications

Measurement / control system
Flow range (intermediate ranges available)min. 0…500 mln/min
max. 0…20 ln/min
(based on N2)
Accuracy (incl. linearity) (based on actual calibration)±1,5% Rd plus ±0,5% FS (N2/Air/O2)
for other gases add conversion uncertainty; see multi gas table;
Repeatability≤ ± 0,2% Rd
Turndown ratio1:50
Max. operating pressure16 bar(g)
Multi Gas/Multi Rangeembedded gas data for 22 unique gases plus any mixture of these gases
Settling time (in control, typical)< 150 ms
Long term stability< 0,5% FS over period of 3 years; then < 0,2% FS per year
Control stability< ± 0,1% FS (typical for 1 ln/min N2)
Operating temperature0 … 50 °C
Storage / Transport conditions-20 … +80 °C, max. 95% RH (non-condensing)
Mountingany position, attitude sensitivity negligible
Temperature sensitivityzero 0,015% FS/ºC; span 0,05% Rd/ºC
Temperature accuracy± 0,2 ºC (instrument body temperature)
Pressure sensitivitystandard: < 0,15% Rd/bar typical N2
Leak integrity, outboardtested < 2 x 10-9 mbar l/s He
Leak-by through closed valvetypical < 1 x 10-4 mbar·l/s He
Mechanical parts
Instrument bodyAluminium
Material (wetted parts)aluminium, stainless steel, silicon nitride, epoxy, aluminium oxide, glass
Surface quality< 1,6 mu Ra
Pressure rating (PN)16 bar(g) / 250 psig 16 bar(g) / 250 psig
Max. ΔP16 bar(d);
20 ln/min models: 5 bar (d)
Process connectionsBSPP female thread (ISO1179-1); couplings to be ordered separately
SealsFKM 51415; valve seat: FFKM with PI film
Weight200 g
Ingress protectionIP40
Electrical properties
Power supply24 Vdc ± 10%
Max. power consumption2,5 Watt (typical, in control)
Digital communicationModbus RTU or FLOW-BUS (selectable)
Support interfaceUSB-C port for easy setup; Optional Bluetooth connection for monitoring
Electrical connection9-pin D-sub (male)
CertificationCE / UKCA / KC
Electrical connection
Control valve options
External actuator options to be connected to the controller
Certification for hazardous areas
Approvals / certificates

Technical specifications subject to change without notice.

For dimensional drawings and hook-up diagrams please visit the product page on our website


FLEXI-FLOW Compact brochure
Manual FLEXI-FLOW Compact
Quick Start Guide FLEXI-FLOW Compact
Mounting Instruction Compression Fittings
Mounting Instruction Push-in Fittings
Hook-up diagrams
Dimensional drawings
Dimensional drawing FF-Sxxx
Solids 3D