Bronkhorst

IN-LINE Filter

Medium Flow Serie M-422

  • Filters for Mass Flow Meters / Controllers
  • For increasing the MTBF (Mean Time Between Failure)
  • Contains a 316L sintered metal filter cartridge
  • Housing: AISI 316
  • O-rings: Viton; optional EPDM and FFKM (Kalrez)
Get a quote Downloads Support
IN-LINE Filter<br /><H2>Medium Flow Serie M-422</H2>

Description

Inherent to its construction, a thermal mass flow meter or controller for gases is sensitive to contamination. To increase the MTBF (Mean Time Between Failure) it is important to make sure that the gas entering the instrument is clean. The IN-LINE Filter Assembly, screwed into the inlet of the instrument, provides this service. It contains a 316L sintered metal filter cartridge that is suitable for general purpose filtration and can be cleaned with a suitable solvent. If the gas contains a large particulate content, we advise the use of a pre-filter.

 

Selection

This Medium Flow filter has a ¼” female thread at the inlet and a ¼” male tread on the outlet. The M-422 series has a porosity (µm) of 2, 5, 10 or 20 μm, depending on the model. The pressure rating for this model is 200 bar. The ΔP across the IN-LINE filter can be calculated with the help of our online calculation tool FLUIDAT on the Net.

 

Technical specifications

Available models
Model no. Average porosity (µm) Connections in Connections out Pressure rating
M-422-16 2 1/4" female 1/4" male 200 bar
M-422-17 5 1/4" female 1/4" male 200 bar
M-422-19 10 1/4" female 1/4" male 200 bar
M-422-21 20 1/4" female 1/4" male 200 bar

Dimensional drawings

Downloads

Brochures
Filters brochure
Dimensional drawings
Dimensional Drawing M-412 / M-422
Dimensional drawings
Dimensional drawings
Dimensional drawings
For dimensional drawings and hook-up diagrams please visit the product page on our website