Bronkhorst

Liquid Flow Filters

  • SS 316L sintered metal filters, for general purpose filtration
  • Cartridges may be cleaned with suitable solvent
  • In case of severe particle content in gas use pre-filter
  • In principle select finest porosity with low ΔP; preferably ΔP not higher than 250 to 500 mbar, and porosity not bigger than 5 mm.
  • Drain facility (on M2 Series)
  • On request: PVDF fine filters for ultra-clean filtering

afbeelding

Description

Filters play a relevant role to protect sensitive components in a fluid system. Bronkhorst® filters for liquid flow purposes offer great flexibility, thanks to the modular concept, whereby they can be equipped with different fluid connectors and filter cartridges. M1 Series filters have the advantage, that their cartridge can be replaced without removing the base from the pipe. The configuration of the M2 Series filters features a drain outlet, provided with a drain plug, which can be replaced by a regular fitting to accommodate proper connection to a drainage facility.


Technical specifications

Available models
Model no. Average porosity (µm) Pressure rating
M1-AB 0.5 100 bar
M1-AC 2 100 bar
M1-AD 7 100 bar
M1-AE 15 100 bar
M2-AF 10 200 bar
M2-AG 40 200 bar
M2-AH 25 200 bar


Downloads

Brochures
Datasheet M2 Filter


Bronkhorst USA inc.

57 South Commerce Way
Suite 120
USA - Bethlehem, PA 18017 
Tel.  +1-610-866-6750
[email protected]

     
Copyright © 2020 Bronkhorst. All rights reserved.     Sitemap     Disclaimer     Privacy note