Bronkhorst

IQ+FLOW IQF-100C MFM

Micro Fluidic Mass Flow Meter for Gases

  • Small footprint ensures space efficiency
  • Very small internal volume
  • Economical solution, low cost of ownership
  • Analog or digital communication
Get a quote Downloads Support
IQ+FLOWIQF-100C MFM

MEMS based Mass Flow Meter for Gases, for OEM Applications

Bronkhorst® IQ+FLOW® model IQF-100C Mass Flow Meters (MFMs) are suited for precise measurement of dry, clean, non-corrosive, non-explosive gases. The ultra compact MFM has a chip-based (MEMS) thermal mass flow sensor and is suited for flow ranges between 0,2…10 mln/min and 0,1…5 ln/min N2-equivalent at operating pressures between vacuum and 10 bar(g). Communication with the devices can be either in analog mode or digital over RS232 or RS485.

The ultra compact IQ+FLOW instruments are typically recommended for integration in analytical and medical equipment.


Technical specifications

Measurement / control system
Flow range (intermediate ranges available)min. 0,2…10 mln/min max. 0,1…5 ln/min
Accuracy (incl. linearity) (based on actual calibration)< ±1,5% RD + ±0,5% FS (Based on calibration with actual gas, at ambient temperature and at customer specified inlet pressure. Horizontal mounting position.)
Repeatabilityfor flows < 20 mln/min: < ±0.5% FS; for flows > 20 mln/min: < ±0,5% RD
Turndown ratio1:50 (2...100%)
FluidsDry, clean, non-corrosive gases. Standard calibration gases Air, N2, Ar, He, CO2 and H2. Other dry, clean, non-corrosive gases on request (O2, CO, …)
Multi fluid capabilitystorage of max. 8 calibration curves
Operating temperature5 50 °C
Temperature sensitivityspan: 0,2% RD/°C; zero: 0,01 mln/min/°C
Pressure drop0,3 psi dif (20 mbard) based on 1 ln/min Air at 0 bar(g)
Leak integrity, outboard1 x 10-8 mbar∙l/s He
Attitude sensitivitymax. error at 90° off horizontal 0,5 mln/min at 1 bar, typical N2
Mechanical parts
Material (wetted parts)aluminium, Si, SiOx, epoxy; option: stainless steel body
Process connections10-32 UNF threaded internal nut with 1/16” ferrule (SS316 or Peek); 1/16” or 1/8” OD compression type
Sealsstandard: Viton®; other on request
Weight0,2 kg
Ingress protectionIP40
Electrical properties
Readout sample time2 msec
Power supply+ 15 24 Vdc
Max. power consumption50 mA
Analog output0...5 (10) Vdc or 0 (4)…20 mA (sourcing output)
Digital communicationRS232, RS485 (Modbus-RTU/ASCII or FLOW-BUS)
Electrical connection
Power/Analog/RS232/RS485RJ45 modular jack
Control valve options
External actuator options to be connected to the controller
Ex-proof specifications
Approvals / certificates

Technical specifications subject to change without notice.

For dimensional drawings and hook-up diagrams please visit the product page on our website

Downloads

Brochures
IQ-FLOW Brochure

Manuals
Manual IQ-FLOW
Quick installation guide

Hook-up diagrams
Analog I-O RS232
RS232-RS485
RS232-RS485 Analog I-O

Dimensional drawing
Dimensional drawing IQF-IQP 1-channel in-line

Solids 3D
IQF-100C-200C


Bronkhorst USA inc.

57 South Commerce Way
Suite 120
USA - Bethlehem, PA 18017 
Tel.  +1-610-866-6750
[email protected]

     
Copyright © 2020 Bronkhorst. All rights reserved.     Sitemap     Disclaimer     Privacy note