Bronkhorst

MASS-STREAM D-6373/BJ-1/2 MFC

Direct Thermal Mass Flow Controller for Gases, IP65 protected

  • Proven direct inline CTA sensor (no bypass)
  • Compact, rugged design (IP65, dust and waterproof)
  • Combination of flowmeter with various control valve options
  • Less sensitivity to humidity or dirt
  • Optional with integrated TFT display
Get a quote Downloads Support
MASS-STREAMD-6373/BJ-1/2 MFC

IP65 Mass Flow Controllers for high flow rates of gases

Bronkhorst® model D-6373/BJ-1/2" Mass Flow Controllers (MFCs) are suited for precise measurement of flow ranges between 2…100 ln/min and 20…1000 ln/min at operating pressures between vacuum and 16 bar (g). The MFC consists of a proven inline thermal (CTA) mass flow sensor, a precise control valve and a microprocessor based pc-board with signal and fieldbus conversion. As a function of a setpoint value, the flow controller swiftly adjusts the desired flow rate. The instument is IP65 complient and can optionally be equipped with a modern, multi-functional and multi-colour display, with operator buttons on the instrument.

The digital MASS-STREAM™ series is characterized by a high degree of signal integrity and, as an option, up to 8 calibration curves of different gases and process conditions can be memorized in the instrument. In addition to the standard RS232 output the instruments also offer analog I/O. As an option, an on-board interface can be mounted to provide CANopen®, DeviceNet™, PROFIBUS DP, PROFINET, Modbus RTU/ASCII or FLOW-BUS protocols.


Technical specifications

Measurement / control system
Flow range (intermediate ranges available)min. 2…100 ln/min
max. 20…1000 ln/min
(based on N2)
Accuracy (incl. linearity) (based on actual calibration)± 1 % RD plus ± 0.5% FS (at calibration conditions)
Repeatability< 0,2 % FS
Turndown ratioup to 1:30
Type of gasesalmost all gases, compatible with chosen materials
Response time (sensor)approx. 0,9 sec.
Control stability< 0,2 % FS typical
Operating temperature0 … 50 °C
Temperature sensitivity± 0,2 Rd/°C (Air)
Pressure sensitivity±0,3% Rd/bar typical (Air)
Max. Kv-value1,1 / 3,4 (remain position)
Leak integrity, outboardtested < 2 x 10-8 mbar l/s He
Attitude sensitivityat 90° deviation from horizontal max. error 0,2 % at 1 bar typical N2
Warm-up time30 min. for optimum accuracy,
within 30 seconds for accuracy ±4% FS
Mechanical parts
SensorStainless steel SS 316 (AISI 316L)
Pressure rating (PN)10 bar g for instrument body in aluminium,
16 bar g for instrument body in stainless steel SS 316
Process connectionsG1/2" / compression type couplings
Sealsstandard: Viton®; option: EPDM
Ingress protectionIP65 (if applicable IP54 for motor driven valve)
Instrument bodyAluminium AL 50ST/51ST (anodised) or stainless steel SS 316;
if applicable: Brass body of motor driven valve
Sieves and ringsTeflon or stainless steel SS 316
Electrical properties
Power supply+24 Vdc ±10%
Max. power consumption
Supply
24 V
Basic consumption
260 mA
Add. for fieldbus
50 mA
Add. for display
20 mA
Analog output0…5 (10) Vdc or 0 (4)…20 mA (sourcing output)
Digital communicationstandard: RS232
options: PROFIBUS DP, PROFINET, CANopen®, DeviceNet™, Modbus RTU or FLOW-BUS
Electrical connection
Analog/RS2328 DIN (male);
PROFIBUS DPbus: 5-pin M12 (female);
power: 8 DIN (male)
CANopen® / DeviceNet™5-pin M12 (male)
FLOW-BUS/Modbus-RTU/ASCII5-pin M12 (male)
EtherCAT®/ PROFINETbus: 2 x 5-pin M12 (female) (in/out)
power: 8 DIN (male);
Control valve options
External actuator options to be connected to the controller
Ex-proof specifications
Approvals / certificates

Technical specifications subject to change without notice.

For dimensional drawings and hook-up diagrams please visit the product page on our website

Downloads

Brochures
MASS-STREAM D-6300 Brochure

Manuals
Manual MASS-STREAM D-6300 instruments
Manual MASS-STREAM D-6300 display

Hook-up diagrams
Analog I-O RS232
DeviceNet
FLOW-BUS
Modbus
PROFIBUS DP with 5-pin M12 connector
PROFINET
CANopen

Dimensional drawings
D-6373-BJ 1-2inch
D-6300 fieldbus cases (option)


Bronkhorst USA inc.

57 South Commerce Way
Suite 120
USA - Bethlehem, PA 18017 
Tel.  +1-610-866-6750
[email protected]

     
Copyright © 2020 Bronkhorst. All rights reserved.     Sitemap     Disclaimer     Privacy note