Bronkhorst

mini CORI-FLOW™ M15

Low Flow Coriolis Mass Flow Meter / Controller

  • High accuracy, excellent repeatability
  • Fast response
  • Independent of fluid properties
  • Additional density and temperature output
  • Compact, rugged (IP65) design
  • Optional ATEX approval Cat.3, Zone 2
Get a quote Downloads Datasheet
mini CORI-FLOW™M15

Low Flow Coriolis Mass Flow Meters / Controllers for Liquid and Gases

mini CORI-FLOW™ Mass Flow Meters and Controllers are precise and compact instruments, based on the Coriolis measuring principle, designed to cover the needs of the low flow market. Bronkhorst® model M15 Mass Flow Meter (MFM) is suited for highly accurate measurement of gas or liquid flow in the range of 0…300 kg/h (which corresponds with 0…4000 ln/min when used on nitrogen) at operating pressures up to 100 bar (higher on request). The instruments are equipped with a robust IP65 weatherproof housing and are optionally available with ATEX approval for use in Zone 2 hazardous areas.

The instrument contains a microprocessor based pc-board with signal and fieldbus conversion and a PID controller for optional mass flow control by means of a separately mounted control valve or pump.


Technical specifications

Measurement / control system
Flow ratesLiquid: 0…300 kg/h (nominal flow rate: 100 kg/h);
Gas: 0…4000 ln/min (N2);
Full Scale (FS) value is user-configurable
Mass flow accuracyLiquid: ±0,2% Rd;
Gas: ±0,5% Rd
Repeatability± 0,05 % of rate ± ½(ZS* x 100/actual flow)%
Turndown ratioup to 1:100
Zero stability (ZS)< ± 50 g/h
(Guaranteed at constant temperature and for unchanging process and environment conditions.)
Response time (sensor)200 msec
Temperature effecton zero: < 5 g/h/°C;
on span: < 0,001% Rd/°C;
self heating (at zero flow): < 10°C
(Depends on flow rate, heat capacity fluid, T amb., T fluid and cooling capacity.)
Operating temperature0 … 70 °C ;
for ATEX Cat.3, Zone 2 max. 50°C
Mountingany position, attitude sensitivity negligible.
External shocks or vibrations should be avoided.
Temperature accuracy± 0,5 °C
Density accuracy< ± 5 kg/m³ (at full scale flow)
Leak integrity, outboardtested < 2 x 10-9 mbar l/s He
Warm-up time> 30 min for optimum accuracy
Mechanical parts
Sensorsingle tube, DN 3.1
Material (wetted parts)stainless steel 316L / 1.4404;
Housingstainless steel 430F
Pressure rating (PN)100 bar abs , higher on request
Process connectionscompression type or face seal (VCR/VCO) couplings, or Tri-Clamp flanges (welded)
Sealsmetal
Weight4,7 kg
Ingress protectionIP65 (weatherproof)
Electrical properties
Power supply+15…24 Vdc +/- 10%
Max. ripple recommended: 50 mV tt
Max. power consumptionmeter: max. 3 W;
controller: max 7 W
Analog output0…5 (10) Vdc, min. load impedance > 2 kΩ;
0 (4)…20 mA (sourcing), max. load impedance < 375 Ω
Analog setpoint0…5 (10) Vdc, min. load impedance > 100 kΩ
0 (4)…20 mA (sourcing), max. load impedance ~ 250 Ω
Digital communicationstandard: RS232;
options: PROFIBUS DP, DeviceNet™, Modbus RTU or FLOW-BUS
Electrical connection
Analog/RS2328-pin DIN (male);
PROFIBUS DPbus: 5-pin M12 (female);
power: 8-pin DIN (male);
CANopen® / DeviceNet™5-pin M12 (male);
FLOW-BUS/Modbus-RTU/ASCII5-pin M12 (male);
Control valve options
M15+C0I: Gas flow control valveKv-max= 6,6 x 10-2
M15+C2I: Liquid flow control valveKv-max= 2,3 x 10-3
M15+C5I: Gas/Liquid flow control valveKv-max= 6,6 x 10-2
M15+F-004AI: Gas/Liquid flow controlKv-max= 3,0 x 10-1
M15+F-004BI: Gas/Liquid flow controlKv-max= 1,0
External actuator options to be connected to the controller
Certification for hazardous areas
Approvals / certificates

Technical specifications subject to change without notice.

For dimensional drawings and hook-up diagrams please visit the product page on our website

Downloads

Brochures
mini CORI-FLOW M15 brochure
CORI-FILL brochure
Manuals
MINI CORI-FLOW Manual
MINI CORI-FLOW M1x Quick Installation Guide
Instruction removing/re-installing transportation bolts M15
Certificaten
ATEX: KEMA 10ATEX0111X
KCs certificate
Hook-up diagrams
Analog I-O RS232
DeviceNet
FLOW-BUS
Modbus
PROFIBUS DP
Dimensional drawings
M15 Mass Flow Meters
M15 Mass Flow Meter with C2I control valve
M15 Mass Flow Meter with C5I control valve
M15 Mass Flow Meter with F-002AI control valve
M15 Mass Flow Meter with F-003AI control valve
M15 Mass Flow Meter with F-003BI control valve
M15 Mass Flow Meter with F-004AI control valve
M15 Mass Flow Meter with F-004BI control valve
M15 Mass Flow Meter with F-033CI control valve
Dimensions Weld Adapters
Solids 3D
M15
Mass block mini Cori-Flow Mxx 2kg
Mass block mini Cori-Flow Mxx 4kg