We offer the widest product range of low-flow (mass) flow meters and controllers on the market. Numerous styles of both standard and bespoke instruments can be offered for applications in laboratory, machinery, industry and hazardous areas.
Customer satisfaction, innovation and quality of product and service have been the cornerstones of Bronkhorst's success. Based on our experience, innovation and sense of responsibility, a relationship with Bronkhorst assures Performance for Life.
Bronkhorst instruments are used for numerous applications in many different markets. In this section you will find an overview of the main markets for our equipment, illustrated with some typical examples of applications.
Are you looking for technical documentation, are you interested to learn more about the measuring principles of Bronkhorst products, or you do want to get in contact with a Bronkhorst Service Engineer? This section will guide you to the relevant service & support topics.
Bronkhorst High-Tech BV the leaders in Mass Flow Meter / Mass Flow Controller technology for gases and liquids, Pressure Controllers and Evaporation Systems.
Bronkhorst ES-FLOW™ Ultrasonic Wave Technology
The operation of Bronkhorst® ES-FLOW™ flow meters is based on the propagation of ultrasound waves inside a very small, straight sensor tube, without obstructions or dead spaces. At the outer surface of the sensor tube multiple transducer discs are located which create ultrasonic sound waves by radial oscillation. Every transducer can send and receive, therefore all up- and down-stream combinations are recorded and processed. By accurately measuring the time difference between the recordings (nanosecond range) the flow velocity and speed of sound is calculated. Knowing these parameters and the exact tube cross-section, the ES-FLOW™ is able to measure liquid volume flows in the range of 4 up to 1500 ml/min.
The distinctive character of this flowmeter is that it’s capable to measure the actual speed of sound, meaning that the technology is liquid independent and calibration per fluid is not necessary.
Product link: ES-FLOW™
(Source: Wikipedia. Note well, these techniques are completely different to the technology Bronkhorst applies in their ES-FLOW series and can therefore not be compared.)
Ultrasonic flow meters measure the difference of the transit time of ultrasonic pulses propagating in a flowing fluid. This time difference is a measure for the average velocity of the fluid along the path of the ultrasonic beam. By using the absolute transit times both the averaged fluid velocity and the speed of sound can be calculated. This measurement principle is only possibly for large bore tubes, for higher flow ranges than the scope of Bronkhorst.
Product link: SONIC-VIEW
Another method in ultrasonic flow metering, also not suited for very low flowrates, is the use of the Doppler shift that results from the reflection of an ultrasonic beam off sonically reflective materials, such as solid particles or entrained air bubbles in a flowing fluid, or the turbulence of the fluid itself, if the liquid is clean.
NL-7261 AK Ruurlo (NL)
Tel. +31 573 458800