Features Weighing scale
- Static measurement
- Step-by-step dosing
- Batch process
Features Mass flow meter
- Inline measurement
- Parallel dosing / cluster dosing
- Semi-continuous process
Weighing Scale versus mass flow meter
Let’s start with the scale: a scale offers a static measurement. It will need a few seconds to settle to stabilize for good accuracy and repeatability. When a liquid is sloshing and needs to settle, additional time can be needed.
In the dosing process the ingredients are dosed step-by-step as in a sequential process. It is not possible to add multiple additives at the same time using only one weighing scale.
You can, when using a flow meter as inline weighing method. If you combine a mass flow meter with a pump or valve, you can dose multiple ingredients simultaneously. This way you create a semi-continuous dosing process instead of a batch process. Besides that, by using this combination of flow meter/pump you create a direct controlled process, meaning the flow meter can adjust the pump speed directly.
Bronkhorst Coriolis flow meter in modular skid
I agree with you; a batch process is somewhat easier to engineer. However, you need to control, produce, and check each batch with risks in batch-to-batch inconsistency, production losses, availability, and required storage space for (premixed) additives. Changes in product can lead to considerable overhaul and set-up costs.
Semi-continuous processes inherently offer a good possibility to reduce waste or excess inventory and to complete more products in less time. Spotting errors and correcting them as well, are simplified because this is done directly, even during the dosing cycle itself. This enables a more continuous process.
Testing liquid dosing solution
Dosing process with a scale
To enable a fast filling time with a scale, high concentrate-additives are often pre-mixed in a batch tank before it is dosed into the production process. Between different batches, the premix tanks and parts of the bottling system must be emptied and cleaned to prevent cross-contamination and ensure hygienic standards.
It is also important to prevent any (mechanical and physical) contact with the scale during the weighing procedure in order not to disturb the accuracy of the scale.
If you mix a dozen of ingredients or you have a long processing time in your dispenser, ingredients will evaporate to some extent. The evaporating rate depends on the size of the bottle opening, temperature, and type of carrier liquid.
Use of volatile, hazardous or smelly additives result in potential environmental odour nuisance and sometimes more severe health, safety and environment (HSE) risks. Additional safety-, ventilation and mechanical measures are often required to contain such “source of release”.
Benefits of in-line weighing with mass flow meters
Benefits of in-line weighing with mass flow meters
Example of dosing liquids with on-board firmware on mass flow controller
1. Faster dosing
Inline mass-dosing does not need premixing. It offers true ‘on demand bottling’ in the final stage of the production process or even directly into the destination container or bottle. Small doses of additives in milligrams or grams can easily be added in less than a second. Modern (mass) flow meters with integrated high-speed dosing (PID) controllers are very accurate. They can be used as inline scale from kilograms down to milligrams directly controlling a valve or pump. They enable smooth and easy dosing of single- or multiple ingredients in parallel, fast and with the highest repeatability.
2. System availability
Overall system availability is increased because traditional batch-related cleaning is not required to the same extend as before. Batch-to-batch deviations are prevented due to the nature of an inline process. The dosing quality is excellent because delicate corrections are executed during the dosing process itself, e.g. to cope with pressure, viscosity, and temperature changes.
3. Semi-continuous (cluster) dosing of ingredients
A unique feature of inline mass dosing is the possibility to dose multiple ingredients in one clustered dosing step, in parallel, resulting in a semi-continuous process set up. The integrated high-speed on-board dosing controller uses intelligent dosing firmware to enable the highest accuracy and speed with automatic correction mechanisms without a direct need for a complex PLC program.
4. Risk reduction
Since the dosing process can be done very fast, strong reduction in evaporative releases can be realised. This can result in a considerable risk reduction, even up to relaxation of the safety measures as described before. Off course, just like many other technologies; mass flow-based inline dosing is somewhat depending on specific system parameters. Your process parameters will determine which of the mentioned benefits are applicable to you.
Bronkhorst can help you
Have you become curious which benefits apply to you? Most projects we execute will start with system configuration advice, a basic demonstration, and a proof of concept, just contact us and learn about your benefits!
Related articles
Calculating flow rates
Piping for flow meters
10 FAQ about liquid dosing