Bronkhorst
MASSFLOW ONLINE products
magnetic flow meters for low flow rates - MAG-VIEW series

MAG-VIEW™ Magnetic Inductive Flow Meters for Low Flow Rates

Compact flow meters for measuring or dosing electrically conductive liquids

MAG-VIEW™ is a compact, high quality yet economic device for measuring liquid flow rates in applications where flow sensors with moving parts cannot be applied. Its interference free operation, combined with a long-life cycle and independence to the inlet and outlet pipework, makes MAG-VIEW™ the perfect solution even in compact machines and installations. The flow meter can be used for continuous measurement or for batching and dosing applications.

  • Lowest range 0,0083 ... 1 l/min
  • Highest range 5 … 250 l/min
Ask advice Go to webshop

E-book: How to handle low liquid flows

Focusing on low liquid flows < 100 g/h

Download the e-book 'How to handle low liquid flows' to find out more about 'low flows'. Including in-depth information, technical advice and insider tips from our experts.

Download e-book

The MAG-VIEW™ series operates on the magnetic inductive principle and is therefore suitable for electrically conductive liquids with a minimum conductivity of 20 or 50 μS/cm. The output signal (pulse frequency or 4-20 mA) is proportional to the flow. The flow meters feature fast response, low pressure drop and a weatherproof (IP65) enclosure.

 

Quick link to Magnetic Flow Meter model pages

Pulse/Analog output - PN 10 bar Pulse output - PN 16 bar Pulse/Analog output - PN 16 bar
  MVM-001-PN  |  0,0083 ... 1 l/min MVM-001-PA  |  0,0083 ... 1 l/min
MVM-002-QA  |  0,1 ... 2 l/min MVM-002-PN  |  0,05 ... 2 l/min MVM-002-PA  |  0,05 ... 2 l/min
MVM-005-QA  |  0,25 ... 5 l/min    
MVM-020-QA  |  1 ... 20 l/min    
  MVM-030-PN  |  0,5 ... 30 l/min MVM-030-PA  |  0,1 ... 30 l/min
MVM-050-QA  |  2,5 ... 50 l/min    
  MVM-060-PN  |  1 ... 60 l/min MVM-060-PA  |  0,2 ... 60 l/min
MVM-200-QA  |  10 ... 200 l/min    
MVM-250-QA  |  12,5 ... 250 l/min MVM-250-PN  |  5 ... 250 l/min MVM-250-PA  |  5 ... 250 l/min

Features

  • Make liquid flows visible by pulse output, analog output (4 .. 20 mA) or blinking LED (red/green)
  • No moving parts (no mechanical wear)
  • Ease of mounting and operation
  • Free pipe cross section, no additional pressure drop
  • Fast response
  • Insensitive with contaminated liquids
  • Ideal solution for interference free operation combined with a long-life cycle
  • Wide independence to the inlet and outlet pipes create the advantage to be able to install in compact machines with cramped confines.
  • Lightweight and compact design
  • Suitable for mobile applications
  • Low power consumption

afbeelding

Downloads

Brochures
MAG-VIEW Brochure
MAG-VIEW application

Applications

The fields of application for this magnetic flow meter are diverse:
They can be used in areas where flow sensors with moving parts (paddle wheel, turbine sensors) cannot be applied due to contaminated media. The sensor is intended for continuously measuring of flow rates or for dosing / batching of electrically conductive liquids with a minimum of 50 µS/cm.

Markets:

  • oil and gas
  • drink and waste water
  • power
  • chemical
  • food and beverage
  • pharmaceutical
  • metals and mining
  • pulp and paper